The Howard Beach–JFK Airport station is a subway/people mover station complex located at Coleman Square between 159th Avenue and 103rd Street in Howard Beach, Queens. The New York City Subway portion of the station is on the IND Rockaway Line and is served by the Rockaway branch of the A train at all times, and the AirTrain JFK portion of the station complex is served by the AirTrain's Howard Beach branch at all times.
The station was originally a Long Island Rail Road (LIRR) station along the Rockaway Beach Branch. The LIRR station opened in 1913 to replace the nearby Ramblersville station. The LIRR ceased operations at this station in 1950, and the New York City Transit Authority bought the section of the Rockaway Beach Branch that included this station in 1952. The subway station opened on June 28, 1956. Between 2000 and 2003, the subway station was completely reconstructed and the AirTrain JFK station was built. The rebuilt complex was completed on December 17, 2003, providing easier access to JFK Airport for large parts of the city.
History
The station originally opened in April 1913 as a Long Island Rail Road (LIRR) station, which replaced the former 1899-built Ramblersville station that was built to the south. In 1923, the station was retrofitted with sheltered sheds on both sides of the tracks. On May 8, 1950, a fire broke out between The Raunt and Broad Channel stations, destroying the trestle over Jamaica Bay, cutting service between Hamilton Beach and the Rockaways. The LIRR was bankrupt and unwilling to rebuild the trestle. As a result, the line was sold to the New York City Transit Authority in 1952.
On June 27, 1955, the Howard Beach station, along with all the rest of the Rockaway Beach Branch stations south of the now defunct Ozone Park station, was taken out of service for eight months for restructuring and upgrading of the tracks, so that they could accommodate subway service. During the project, the Howard Beach station, along with the Broad Channel and Far Rockaway stations, was completely rebuilt utilizing a modern design, which included a new overhead passageway between the two platforms. The design was created by architect J. Harold Sandifer, a native of the Rockaways. Many of the parts for the station were prefabricated, speeding construction. On June 28, 1956, the station reopened as a subway station along with the rest of the line. The previous Long Island Rail Road station at this location was razed. Inauguration ceremonies were held at the station as well as at Euclid Avenue in Brooklyn.
In June 1978, the Metropolitan Transportation Authority (MTA) announced plans for an "experimental" subway-bus service between Manhattan and JFK Airport, terminating at the Howard Beach subway station where passengers could transfer to a free shuttle bus to the airport. The JFK Express began operation on September 23, 1978, operating as a premium service, with riders paying the additional fare on board. The service ran express on the IND Sixth Avenue Line to West Fourth Street–Washington Square, where it switched to the IND Eighth Avenue Line and ran express to Jay Street–Borough Hall in Downtown Brooklyn. From that point on, it ran non-stop on the IND Fulton Street Line and IND Rockaway Line to Howard Beach–JFK Airport. In its early years, the service was more successful, with 6,000 passengers carried on the maximum day. However, the premium service lost its allure as the rest of the subway system was improved, with reduced crime and new graffiti-free trains. As a result, more passengers opted to take the slower A to Howard Beach. The JFK Express was discontinued on April 15, 1990 due to low ridership, with as few as 3,200 riders per day. The bus service, connecting the station and JFK, continued after JFK Express service ended, and was the only link between the airport and the Howard Beach station at the time. Ridership on the A to the Airport increased after the discontinuation of the JFK Express: in 1995, about 1 million passengers used the A to the Airport.