40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) are groups of computer networking technologies for transmitting Ethernet frames at rates of 40 and 100 gigabits per second (Gbit/s), respectively. These technologies offer significantly higher speeds than 10 Gigabit Ethernet. The technology was first defined by the IEEE 802.3ba-2010 standard and later by the 802.3bg-2011, 802.3bj-2014, 802.3bm-2015, and 802.3cd-2018 standards. The first succeeding Terabit Ethernet specifications were approved in 2017.
The standards define numerous port types with different optical and electrical interfaces and different numbers of optical fiber strands per port. Short distances (e.g. 7 m) over twinaxial cable are supported while standards for fiber reach up to 80 km.
Standards development
On July 18, 2006, a call for interest for a High Speed Study Group (HSSG) to investigate new standards for high speed Ethernet was held at the IEEE 802.3 plenary meeting in San Diego.
The first 802.3 HSSG study group meeting was held in September 2006. In June 2007, a trade group called "Road to 100G" was formed after the NXTcomm trade show in Chicago.
On December 5, 2007, the Project Authorization Request (PAR) for the P802.3ba 40 Gbit/s and 100 Gbit/s Ethernet Task Force was approved with the following project scope:
The purpose of this project is to extend the 802.3 protocol to operating speeds of 40 Gbit/s and 100 Gbit/s in order to provide a significant increase in bandwidth while maintaining maximum compatibility with the installed base of 802.3 interfaces, previous investment in research and development, and principles of network operation and management. The project is to provide for the interconnection of equipment satisfying the distance requirements of the intended applications.
The 802.3ba task force met for the first time in January 2008. This standard was approved at the June 2010 IEEE Standards Board meeting under the name IEEE Std 802.3ba-2010.
The first 40 Gbit/s Ethernet Single-mode Fibre PMD study group meeting was held in January 2010 and on March 25, 2010, the P802.3bg Single-mode Fibre PMD Task Force was approved for the 40 Gbit/s serial SMF PMD.
The scope of this project is to add a single-mode fiber Physical Medium Dependent (PMD) option for serial 40 Gbit/s operation by specifying additions to, and appropriate modifications of, IEEE Std 802.3-2008 as amended by the IEEE P802.3ba project (and any other approved amendment or corrigendum).
On June 17, 2010, the IEEE 802.3ba standard was approved. In March 2011, the IEEE 802.3bg standard was approved. On September 10, 2011, the P802.3bj 100 Gbit/s Backplane and Copper Cable task force was approved.
The scope of this project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add 100 Gbit/s 4-lane Physical Layer (PHY) specifications and management parameters for operation on backplanes and twinaxial copper cables, and specify optional Energy Efficient Ethernet (EEE) for 40 Gbit/s and 100 Gbit/s operation over backplanes and copper cables.
On May 10, 2013, the P802.3bm 40 Gbit/s and 100 Gbit/s Fiber Optic Task Force was approved.
This project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add 100 Gbit/s Physical Layer (PHY) specifications and management parameters, using a four-lane electrical interface for operation on multimode and single-mode fiber optic cables, and to specify optional Energy Efficient Ethernet (EEE) for 40 Gbit/s and 100 Gbit/s operation over fiber optic cables. In addition, to add 40 Gbit/s Physical Layer (PHY) specifications and management parameters for operation on extended reach (>10 km) single-mode fiber optic cables.
Also on May 10, 2013, the P802.3bq 40GBASE-T Task Force was approved.
Specify a Physical Layer (PHY) for operation at 40 Gbit/s on balanced twisted-pair copper cabling, using existing Media Access Control, and with extensions to the appropriate physical layer management parameters.
On June 12, 2014, the IEEE 802.3bj standard was approved.
On February 16, 2015, the IEEE 802.3bm standard was approved.
On May 12, 2016, the IEEE P802.3cd Task Force started working to define next generation two-lane 100 Gbit/s PHY.
On May 14, 2018, the PAR for the IEEE P802.3ck Task Force was approved. The scope of this project is to specify additions to and appropriate modifications of IEEE Std 802.3 to add Physical Layer specifications and Management Parameters for 100 Gbit/s, 200 Gbit/s, and 400 Gbit/s electrical interfaces based on 100 Gbit/s signaling.
On December 5, 2018, the IEEE-SA Board approved the IEEE 802.3cd standard.