_Acetic amyl ether_ or _amyl acetate_, C_{ 5}H_{ 11}O.C_{ 2}H_{ 3}O, is prepared by mixing 1 part of amyl alcohol with 1 part of concentrated sulphuric acid, and distilling the mixture with 2 parts of potassium acetate. The distillate is washed with water, to which some carbonate of soda has been added, and then rectified over magnesia. It forms a colorless liquid of an agreeable fruity odor. It boils, according to Kopp, at 280° F. and, at 59° F., its specific gravity is 0.8692.
For use in perfumery, the ether is best prepared, according to Fehling's directions, by heating for some time at a temperature of 212° F. 1 part of glacial acetic acid with ½ part of sulphuric acid and one part of amyl alcohol. By then adding water the ether is separated. By this process distillation is avoided.
_Acetic ethyl ether_ or _ethyl acetate_, C_{ 2}H_{ 3}O.O.C_{ 2}H_{ 5}. Acetic ether is formed by the decomposition of sodium acetate by ethyl sulphuric acid:--
SO_{ 2} { OC_{ 2}H_{ 5} + C_{ 2}H_{ 3}O.ONa = { OH └----┬-----┘ └------┬------┘ Ethyl sulphuric Sodium acetate. acid.
SO_{ 2} { ONa + C_{ 2}H_{ 3}O.OC_{ 2}H_{ 5} { OH └--┬--┘ └---------┬----------┘ Acid sodium Acetic ether. sulphate.
One molecule of sulphuric acid or 98 parts is mixed with one molecule of alcohol or 46 parts, or with 1 molecule of alcohol of 90 per cent. which contains 85.75 per cent. of absolute alcohol, hence with 53.6 parts of alcohol, and distilled with 1 molecule or 82 parts of anhydrous sodium acetate. Since commercial sulphuric acid always contains 5 or 6 per cent. of water, this has to be taken into consideration, and 105 to 106 parts of it have to be used in order to decompose the entire quantity of sodium acetate. The crude sodium acetate found in commerce may be used. It is nearly white and at the utmost contaminated by traces of sulphuric acid and chlorine, which in this case are not injurious. The crystallized salt is heated in an iron kettle whereby it melts in its water of crystallization. With constant stirring the water is then completely evaporated until an entirely dry mass of salt remains behind. The latter may be quite strongly heated without fear of destroying the acetic acid. The dried salt is immediately powdered, passed through a medium fine sieve and kept for use in well-closed vessels.