MACHINE BORING.--In machine drilling, the operations necessarily differ somewhat in their details from those of hand boring, and, in some cases, other methods of procedure will be adopted more suitable to the requirements of machine labour. It may even be, and in most cases indeed is, inexpedient to follow closely the principles which lead to economy of the explosive substance employed, since the more restricted conditions under which machine power may be applied may point to more important gains in other directions. Thus it may be found more conducive to rapidity of execution to determine the position and the direction of the shot-holes rather to satisfy the requirements of the machine than those of the lines of least resistance; or, at least, these requirements must be allowed to have a modifying influence in determining those positions and directions. For it is obvious that holes cannot be angled with the same ease when a machine drill is used, as they can when the boring is executed by hand.

_Boring the Shot-holes._--It has already been remarked that the exigencies of machine labour render it impracticable to follow closely the principles which lead to economy of labour and material in blasting. In hand boring, economy is gained by reducing to a minimum the number of holes and the quantity of explosive substance required. But in machine boring, economy is to be sought mainly in the reduction of the time needed to accomplish the driving.

Rock Blasting — Part 68

Attempts have been made to assimilate the methods of machine boring to those adopted for hand labour, but the results have not been satisfactory. On the contrary, the conditions determining the position and the direction of the holes relatively to the production of the greatest useful effect have been wholly ignored in favour of those which determine the most rapid boring. This system has been attended with more satisfactory results. Another system, partaking of both the preceding, is widely adopted, and hitherto the best results have been obtained from this, which may be regarded as a compromise between conflicting conditions. Thus we have three systems of executing machine boring: one in which a single machine is used upon a support capable of holding it in any position, so as to be able to bore at any angle, and in which the holes are placed according to the lines of least resistance, as in hand boring. A second, in which several machines are fixed upon a heavy support, allowing but little lateral or angular motion, and in which the holes are placed at regular intervals apart, and bored parallel, or nearly parallel, with the axis of the excavation, irrespective of the varying nature of the rock, and the lines of least resistance. And a third, in which it is sought, by the employment of one, two, or at the most three machines, upon a simple and light support allowing the position and direction of the machine to be readily changed, to satisfy in some degree the two sets of conditions determining the two former systems, by placing the shot-holes as far in accordance with the lines of resistance as the exigencies of a fairly rapid handling of the machine will allow.

Rock Blasting — Part 68