The various groups of this gun were shipped to the plant of the Maryland Pressed Steel Co., Hagerstown, Md., for assembly and were there tested at a specially built proving ground, 8 miles from the factory.
Three 37's were issued to each infantry regiment, making one for each battalion. The required equipment for a division was, therefore, 12 weapons.
[Illustration: THE 37-MILLIMETER INFANTRY CANNON.]
[Illustration: TWO VIEWS OF 75-MILLIMETER FIELD GUN, MODEL 1918 (AMERICAN).]
_Figures on 37-millimeter gun production._
Guns procured from the French Government 620 Guns ordered manufactured in United States, October, 1917 1,200 Increase in order, September, 1918 1,397 Total number ordered in United States 2,597 Total number of guns completed prior to the signing of the armistice 884 Guns delivered for overseas shipment prior to the signing of the 300 armistice Guns shipped to various camps in this country 26 Guns shipped to other points in this country 4 On hand at Hagerstown Arsenal, proof fired 425 Completed and ready for proof firing 129
Next in order in the upward scale of sizes we come to the 75-millimeter gun, which was by far the most useful and most used piece of artillery in the great war. In fact the American artillery program might be divided in two classes, the 75's in one class, and all other sizes in the other, since it may be said practically that for every gun of another size produced we also turned out a 75. In number the 75's made up almost half of our field artillery. The 75-millimeter gun threw projectiles weighing between 12 and 16 pounds and it had an effective range of over 5½ miles.
We approached the war production of this weapon with three types available for us to produce--our own 3-inch gun; its British cousin the 3.3-inch gun or 18-pounder; and the French 75-millimeter gun, with its bore of 2.95275 inches. The decision to adopt the 75-millimeter size and modify the other two guns to this dimension, giving us interchangeability of ammunition with the French, was an historic episode in the American ordnance development of 1917.
While in 1917 the French with their excess manufacturing capacity began work on our first orders for 1,068 guns of this size to supply our troops during the interim until American factories could come into production, we were preparing our factories for the effort. Roughly speaking the 75 consists of a cannon mounted on a two-wheeled support for transportation purposes. This support also provides a means for aiming by suitable elevating and traverse mechanisms. As previously explained, a recoil mechanism is also provided to absorb the shock of firing, allowing a certain retrograde movement of the cannon and then returning it in position for the next shot--returning it "into battery," as the artillerists say. By its recuperator device the field gun of to-day is chiefly distinguished from its brother of the latter part of the nineteenth century. Without a recuperator the gun would leap out of aim at each shot and would have to be pointed anew; but one with a recuperator needs to be pointed only at the beginning of the action.