The first railway line in New Zealand (apart from tramways) was the line from Christchurch to Ferrymead (now part of the Lyttelton Line) opened in 1863. Under the “Grand Go-ahead Policy” of public works instituted by Sir Julius Vogel in 1870 (see Vogel Era) the network was rapidly expanded. Initially lines went from the main town and port to the rural hinterland, but the line between the cities of Christchurch and Dunedin (part of the Main South Line) section of the South Island Main Trunk Railway opened in 1878. The New Zealand Railways Department was established in 1876, and the rail network was then run by the central government rather than by provincial governments. Signalling installation was handled by district engineers in the maintenance branch. The Rakaia rail accident in 1899 when four passengers were killed showed the deficiencies in railway signalling and braking; Rakaia did not have fixed signals, and rolling stock apart from locomotives did not have air brakes. But those lines with heavier traffic already had block working installed. The first signalling and interlocking engineer had already been appointed in 1899 at a salary of £400; Arthur H. Johnson, who had “considerable experience in England and America” and who was to design and develop a uniform system of interlocking points and signals. <!—NZ Herald 23 May 1898 --> But he resigned in 1899, and returned to England c1901. He was replaced by Henry John Wynne from 1900; with staff of a chief signal inspector in Wellington and several regional signal inspectors. Wynne retired in 1929. Wynne was replaced by Guy Wilfred Wyles (1887-1947) as Signalling and electrical engineer. Wyles had started with Sykes Interlocking Co in London. He married into Wynn’s family, and died of peritonitis three months before his retirement. The first three engineers all trained in England. Signalling in New Zealand was based on British practice for 60 years until about 1922, when it became “essentially indigenous” – partly British with two-aspect mechanical signalling and partly American with automatic three-aspect signalling using so-called ‘”speed’ indicators.
Systems used
Train signalling systems used in New Zealand were: Tyers’ No 7 Tablet system Centralised Traffic Control (CTC), Block working using Winters block working (single-line) or Sykes’ lock and block working (double-line). 'Track Warrant Control (TWC) and Station Limits 'Double Line Automatic (DLA), (a form of absolute block working). Automatic Signalling Rules (ASR)
Equipment
The equipment used was often from Westinghouse (including the Westronic S2 CTC system) or from McKenzie & Holland, a British firm which had Australian and New Zealand subsidiaries or branches, with factories. In 1894 the firm obtained the patent rights of the British subsidiary of Westinghouse Air Brake Co of Pittsburg,Pa, UJSA; in 1907 it combined but did not merge to form the Mckenzie, Holland and Westinghouse Power Signal Co of Lonndon; in 1920 with Saxby interests formed the Westinghouse & Saxeby Signal Co (WB&SS) of London; in 1935 it became the Westinghouse Brake and Signal Co (WBS). The two Australian branches became separate companies; in 1960 the holding company WBS Australia formed McKenzie & Holland (N.Z.) to manufacture Westinghouse rectifiers. In 1979 the Westinghouse Group was taken over by the Hawker Siddeley Group. Other manufacturers used were Siemens, AEI-GRS, GPT Plessey, GRS Syncrostep, and British Power Railway Signalling Co (B.P.R.S.) Power-operated points were generally electrically driven with 110V ac Westinghouse Brake and Signal (WBS), M2, M3 and M5 style equipment. At Auckland, Dunedin and the Te Rapa marshalling yard were air operated (pneumatic). Marton had SGE 110 v dc points.
The Tyler Tablet system
Tyer's tablet working using the Tyeer’s No 7 system was used in New Zealand from 1901 to 1994, as most lines apart from sections near the main centres were single-track.
Tablets were of red fibre, 99 mm diameter and 6 mm thick, and weighed 55g. They were marked with the serial number and the names of the station at each end of the section; and had a range of notches and type of centre hole. Tablets were originally exchanged by hand using cane slings. Later (safer) mechanical exchangers were used, although some stock (DX locomotives and Silver Fern railcars) did not have tablet forks, and slings ha to be used unless the train stopped there. When exchanging tablets, speed was limited to 45 mph (72 km/h).