The 24 cm K L/20 was a 24 cm caliber Krupp gun which was the first heavy Ring Kanone or built-up gun used by Germany. It was a rifled breech loader with a Krupp cylindroprismatic sliding breech and a Broadwell ring.
The 24 cm K L/20 was also known as 96-pdr, 9 inch gun and kurze 24 cm Ring Kanone. It saw extensive testing of several new concepts.

Background
In 1858, Prussia decided to use rifled breechloading guns of 9, 12 and 15 cm caliber for its artillery. The idea was that the same guns would be used for the navy and coastal defense. However, tests in the early 1860s showed that even the 15 cm rifled breechloader was almost useless against the standard 114 mm ship armor of the time. In mid-April 1862, this led to a recommendation to develop a 36-pdr caliber (17 cm) gun. In late April 1862, this was followed by a recommendation to develop a 19.3 cm (48-pdr caliber) gun. In mid 1864 trials showed that the developed 19.3 cm gun was still too light.

In Fall 1864 the Prussian Navy then ordered its first massive steel 21 cm rifled breechloaders a.k.a. as 72-pdrs. These were made according to a design by the Navy Departement. To all appearances, the Prussian, Austrian and Russian navies planned to standardize on an 8 inch gun. For Russia, this was a 20.3 cm gun. For Prussia, it was a 21 cm gun, because Prussia used the slightly longer Prussian inch called of 26.154 mm. 8 Prussian inches equaled 209.2 mm.

Even before the first Prussian 21 cm gun started its trials, its Inspection of the Artillery advised to develop an even heavier caliber gun in February 1865. This was based on the artillery developments in foreign countries and the general increase in armor thickness. Combined with other developments, this would lead the Prussian Navy to order two 24 cm guns for testing in 1867. Krupp then proposed to use the ring or built up construction, which led to the first two 24 cm Kanone L/20 being delivered in December 1867.
After the 24 cm Kanone L/20 had been tested, an longer version was designed and ordered. This would become the 24 cm Ring Kanone L/22. Somewhat before mid December 1868, Krupp got the order to design this longer version of the 24 cm Kanone L/20 and a longer version of the 21 cm RK L/19. The L/22 was supposed to have the have the same weight as the L/20 but would become significantly heavier. It was used in coastal defence.
Characteristics
Names and models
The names 96-pdr and '9 inch gun' for the 24 cm K L/20 and the longer 24 cm RK L/22 are due to the shift from traditional to newer systems to denote the caliber (inner diameter) of a gun barrel. In the traditional system for smoothbore muzzleloading guns, the caliber was denoted by the weight of the shot in pounds. This made sense, because all shot were the same i.e. round, giving a direct relation between the two. When rifled guns were introduced, the shot became cylindrical. The designation 96-pounder therefore meant: of a caliber that could fire a 96 pound round bullet.
The 96-pdr would actually fire a cylindrical shot of about 300 pounds. Due to this marked difference, the English and American rifled guns of about the same caliber were named 300-pounders. The Prussian Navy did not follow this practice, but continued to officially refer to 96-pdrs. When a slightly longer model of the 24 cm K L/20 was made, the two were held apart by the designations 'kurzer Ring 96-pfdr 180" lang' and 'langer Ring 96-pfdr 200" lang'.
The name 9 inch gun or 9 zölliges is in line with current practice to refer to the actual inner diameter of the gun. In January 1867 the Prussian Navy ordered Krupp to design a 9 inch (96-pdr) gun barrel. This was the 24 cm K L/20, which had a caliber of 235.4 mm. From this measurement we know that Krupp designed a gun with a caliber of 9 Prussian inch or Zöll, which explains why Krupp and others liked to refer to the 9 inch gun.
When the Prussian Navy shifted to the metric system, the guns received the names 'kurze 24 cm Kanone' and 'lange 24 cm Kanone'. In 1885, the kurze 24 cm Ring Kanone was renamed '24 cm Kanone L/20' abbreviated: '24 cm K L/20'. The lange 24 cm Kanone was renamed '24 cm Ring Kanone L/22' abbreviated: '24 cm RK L/22'.
Characteristics of the 24 cm L/20
The design of the 24 cm K L/20 had been ordered in January 1867. Just like previous Krupp guns built for Prussia, it was a rifled breech loader. Other characteristics were new for the Prussian Navy: The built-up gun barrel consisted of an inner tube strengthened by two more tubes. The breech was Krupp's cylindroprismatic variant of its horizontal sliding wedge breech block. Of the first two guns, one used a Broadwell ring for obturation, the other used copper scales.





