Rec. 709, also known as Rec.709, BT.709, and ITU 709, is a standard developed by ITU-R for image encoding and signal characteristics of high-definition television.
The most recent version is BT.709-6 released in 2015. BT.709-6 defines the Picture characteristics as having a (widescreen) aspect ratio of 16:9, 1080 active lines per picture, 1920 samples per line, and a square pixel aspect ratio.
The first version of the standard was approved by the CCIR as Rec.709 in 1990 (there was also CCIR Rec. XA/11 MOD F in 1989), with the stated goal of a worldwide HDTV standard. The ITU superseded the CCIR in 1992, and subsequently released BT.709-1 in November 1993. These early versions still left many unanswered questions, and the lack of consensus toward a worldwide HDTV standard was evident. So much so, some early HDTV systems such as 1125/60 and 1250/50 were still a part of the standard as late as 2002 in BT.709-5.
Technical details
The standard is freely available at the ITU website, and that document should be used as the authoritative reference. The essentials are summarized below.
Image definition
Recommendation ITU-R BT.709-6 defines a common image format (CIF) where picture characteristics are independent of the frame rate. The image is 1920x1080 pixels, for a total pixel count of 2,073,600.
Previous versions of BT.709 included legacy systems such as 1035i30 and 1152i25 HDTV systems. These are now obsolete, and replaced by the system defined in the 2015 ITU BT.709-6.
Frame rates
BT.709 offers over a variety of frame rates and scanning schemes, which along with separating the picture size from frame rate has provided the flexibility for BT.709 to become the worldwide standard for HDTV. This allows manufacturers to create a single television set or display for all markets world-wide.
BT.709-6 specifies the following frame rates, where P indicates a progressively scanned frame, PsF indicates progressive segmented frames, and I indicates interlaced:
24/P, 24/PsF, 23.976/P, 23.976/PsF
match the frame rate used for theatrical motion pictures. The fractional rates are included for compatibility with the "pull-down" rates used with NTSC. 50/P, 25/P, 25/PsF, 50/I (25 fps) regions that formerly used 50 Hz systems such as PAL or SECAM. There are no fractional rates as PAL and SECAM did not have the pull-down issue of NTSC. 60/P, 59.94/P, 30/P, 30/PsF, 29.97/P, 29.97/PsF, 60/I (30 fps), 59.94/I (29.97 fps) regions that formerly used 60 Hz systems such as NTSC. Here again, the fractional rates are for compatibility with legacy NTSC pull-down rates.
Image capture, encoding, and distribution
Per BT.709, cameras may capture in either progressive or interlaced form. Video captured as progressive can be recorded, broadcast, or streamed as progressive or as progressive segmented frame (PsF). Video captured using an interlaced mode must be distributed as interlace unless a de-interlace process is applied in post production.
In cases where a progressive captured image is distributed in segmented frame mode, segment/field frequency must be twice the frame rate. Thus 30/PsF has the same field rate as 60/I.
Primary chromaticities
Note that red and blue and yG are the same as the EBU Tech 3213 (PAL) primaries while the xG is halfway between EBU Tech 3213's xG and SMPTE C's xG (PAL and NTSC are two types of BT.601-6). In coverage of the CIE 1931 color space the Rec. 709 color space (and the derivative sRGB color space) is almost identical to Rec. 601 and covers 35.9%. It also covers 33.24% of CIE 1976 u’v’ and 33.5% of CIE 1931 xy. White point is D65 as specified in 2° standard observer.
Transfer characteristics
Rec. 709 specifies a non-linear OETF (opto-electrical transfer function) which is known as the "camera gamma" and which describes how HDTV camera encodes the linear scene light into a non-linear electrical signal value. Rec. 709 doesn't specify the display EOTF (electro-optical transfer function) which describes how HDTV displays should convert the non-linear electrical signal into linear displayed light, that was done in ITU-R BT.1886. Rec.709 is "scene-referred", which means that change of primaries should happen on scene linear light (by applying inverse OETF, changing primaries and applying OETF again, only after which you convert to display linear light using EOTF).
Rec. 709 OETF is as follows, close to 1/1.9 – 1/2.0 pure gamma: