The lean-to house is in most respects inferior to the span-roofed; one of the latter could be converted into two of the former of opposite aspects by a divisional wall along the centre. Except where space does not permit a span-roofed building to be introduced, a lean-to is not to be recommended; but a house of this class may often be greatly improved by adopting a half-span or hipped roof--that is, one with a short slope behind and a longer in front.
[Illustration: FIG. 4.--Section of Plant Stove.]
Where the cultivation of large specimens has to be carried on, a span-roofed house of greater height and larger dimensions may sometimes prove useful; but space for this class of plants may generally be secured in a house of the smaller elevation, simply by lowering or removing altogether the staging erected for smaller plants, and allowing the larger ones to stand on or nearer the floor. The _Plant Stove_ differs in no respect from the greenhouse except in having a greater extent of hot-water pipes for the purpose of securing a greater degree of heat, although, as the plants in stove houses often attain a larger size, and many of them require a bed of coco-nut fibre, tan or leaf mould to supply them with bottom heat, a somewhat greater elevation may perhaps be occasionally required in some of the houses. For the smaller plants, and for all choicer subjects, the smaller size of house already recommended for greenhouses, namely 20 ft. wide and 12 ft. high, with a side table of 4 ft. on each side, a pathway of 3 ft. and a central stage on two levels of 6 ft. wide, will be preferable, because more easily managed as to the supply of heat and moisture. It will be seen (fig. 4) that along the ridge of the roof a raised portion or lantern light b, b is introduced, which permits of the fixing of two continuous ventilators, one along each side, for the egress of heated and foul air, openings a, a being also provided in the side walls opposite the hot-water pipes for the admission of pure cold air. This type of house is also very suitable for greenhouse plants, but would not need so much heating apparatus. Three or four rows of flow and return pipes respectively will be required on each side, according to the heat proposed to be maintained.