The South Australian Iron and Steel Company, officially South Australian Iron and Steel Company Limited, was a colonial era iron-making venture, located in the Hindmarsh Tiers, near Mount Jagged, in the upper reaches of the Hindmarsh River Valley, South Australia. Its blast furnace operated intermittently, over the period from 16 July to 5 December 1874.

Historical context

The presence of hematite and magnetite iron ore in South Australia had been well known, from soon after colonial settlement took place. There had been experimental smelting of the ores as early as the early 1840s. The deposits in the state are vast and widespread, but those in the southern Mount Lofty Ranges, such as at Mount Jagged and Mount Cone (within the modern-day locality of Mount Compass), were relatively close to the newly settled areas around the seaport of Victor Harbor.

South Australian Iron and Steel Company

There was an increase in pig-iron prices in the early 1870s, which led to the formation of a number of colonial-era iron-making ventures in Australia. A world-wide shortage caused the price of imported pig-iron to increase, from £4 10s per ton in 1870 to £9 per ton in 1873 greatly advantaging locally manufactured iron. However, this high price did not last long, as iron-making capacity increased and pig-iron was once again imported cheaply as ballast in sailing ships returning from England to Australia.

South Australian Iron and Steel Company

In 1871, James Martin, at the Phoenix Foundry, in Gawler, had smelted a small quantity of iron, using ore from the Barossa Valley. Some of the iron made then survives in an iron fence in Murray Street, Gawler, which commemorates the event.

South Australian Iron and Steel Company

Company

In December 1873, a prospectus was issued for the South Australian Iron and Steel Company Limited. The new company was, "for the purpose of Smelting and Manufacturing Iron and Steel from the very rich Magnetite and Hematite Iron Ore found at Mount Cone, near Victor Harbour, of which there is a very large quantity in sight, as well as an unlimited supply of Limestone." It held its first shareholder's meeting was held on 22 December 1874. The company's offices were in Grenfell Street, Adelaide. Share scrip issued in February 1874. A call of two shillings per share was made in March 1874.

The colonial parliament of South Australia voted to give bonus of £2000 for the first 500 tons of pig-iron manufactured in the colony. This bonus alone would allow the company to recoup much of the £3000 that it had raised in capital to build its plant, and commence operation.

Ore mines and blast furnace

Location

In April 1874, the company bought a total of 93 acres, (with a 44 acre lot being for furnace buildings, workshops, huts, sheds, &c.) of land for its furnace and works. The mine and furnace site was in area known as the Hindmarsh Tiers, near Mount Jagged. The furnace site was about nine miles "as the crow flies"—eleven or twelve miles by road—from the seaport of Victor Harbor, along the road to Myponga.

The company's original magnetite and hematite quarry site was about four miles from the furnace site, at Mount Cone (today within Mount Compass). Later hematite ore was found on the company's property at the smelter site. It was this nearby ore that was to be used first.

Ore, flux and fuel

Detailed analysis of the ores, by Dr William Wallace, of Glasgow, gave the iron content of the magnetite ore as being 66.34% and that of the hematite ore 53.7%. Due to pig iron being an impure form of iron, the pig iron content of the ore was slightly higher; for the magnetite 71.8% and 58.1% for the hematite. Wallace also analysed the composition of a sample of the company's limestone, which is used as a flux in smelting, and found it suitable.

There was no coal resource in South Australia to provide coke. The only alternative, to shipping coal or coke from other colonies, was to use local timber to make charcoal, to use as the fuel and reducing agent.

Blast furnace

The blast furnace was "built after the design of similar furnaces at work at Vordernberg in Sweden", and was named 'Pioneer'. It was 30 feet high, with an internal capacity of 452 cubic feet. It was "built of firebricks, sheathed with iron plates, girded with iron hoops" and its base was "a pentagon of red bricks, lined with the best English firebricks". The air blower was driven by a 20 h.p. horizontal steam engine, with a vertical boiler, and was capable of 700 cubic feet of air per minute. The furnace and its blast equipment were designed to produce 7½ tons of pig iron every 24-hours.