Hispano-Argentina was an Argentine automotive and engineering company that manufactured automobiles, military vehicles, engines, weaponry, and parts for public works.
The company had two divisions, the automobile manufacturer (known for its acronym "HAFDASA") and the Public Works and Finances division ("CHADOPYF"), which worked separately. The company was a vehicle and weapons supplier for the Argentine Army and other local armed forces, developing the Ballester–Molina pistol.
History
Formation
In 1925, Argentine entrepreneur Arturo Ballester obtained a license to represent the Hispano-Suiza brand in Argentina. The deal ruled that vehicles would be initially imported and later built domestically. In order to achieve that goal, Ballester associated to his brother-in-law, engineer Eugenio Molina, to build a plant for the production of automatic weaponry. To unify production, a 5,000 m2 plant was built with the highest technology available at the time. It was built at 250 Campichuelo street in the Caballito neighborhood. Thus "Hispano Argentina Fábrica de Automóviles S.A." (HAFDASA) was devoted to the production of Hispano-Suiza vehicles and motors, and also parts and replacements for this and other automotive, truck, and bus marques.
Vehicles
At the beginning, they dedicated themselves to manufacturing trucks and tractors for civilian and military use. They also produced diesel and gasoline motors for vehicles and fixed installations, of different power, produced completely in Argentina.
The first totally-manufactured in Argentina product was a bus produced at the Caballito factory. The HA buses would be used by several colectivos companies of Buenos Aires for public transport. Nevertheless, the company reached its peak through the powerful imputus by Carlos Ballester Molina, Arturo'son (also Eugenio's nephew), who got a degree in engineering in order to expand the family-owned business. Less than 10 years after its foundation Hispano-Argentina produced 40% of the demand for trucks over 4 tons.
One of the engines was subjected to a rigorous test of 200 hours of continuous operation under the control of the representatives of the Army, the Navy and Fiscal Oilfields, with satisfactory results. In addition, the Hispano-Argentina products were exhibited at the 1937 Automobile Show held in Buenos Aires.
In 1938 the first truck-tractor was developed, a 3-axle heavy vehicle with 6 driving wheels, all its vital parts were built in Buenos Aires: chassis, wheels, tires, cameras, transmission, cylinder block, pistons, crankshaft, connecting rods, with the exception of the injection pump. The “Criollo”, as the truck was called, had the possibility of developing a pulling force of 200 tons in first gear, could move with a load at 60 km/h, had 6 speeds forward and 2 backwards.
The vehicle was tested in military maneuvers carried out in Concordia, Entre Ríos, dragging heavy artillery pieces with their supply of ammunition and personnel (23–24 men with all their equipment), crossing fords of more than 1 meter of water, climbing ravines, and even pulling trucks of 3 to 4 tons each out of a quagmire. The vehicle also had a low fuel consumption, using 1,500 liters of diesel fuel during the month it was tested.
Diesel prototypes
Ballester Molina's experimentation with the Criollo engine led him to build a vehicle prototype developed from a lightened truck chassis. With this prototype, Molina reached, in 1939, a record by traveling 1,200 kilometers at an average speed of 135 km/h, reaching 183 km/h in some sections. Encouraged by this success, Ballester Molina experimented in the field of high-end vehicles aimed at a public with greater purchasing power. From the chassis of Hispano Suiza models from 1932 and 1937, adaptation work began in order to be able to equip them with the own-developed Criollo diesel engines. As a result, two prototypes (both four-door luxury sedans) were developed, one with a 75 HP 4-cylinder engine (D1) and the other with a 150 HP 6-cylinder engine (D3).
The vehicle equipped with a D3 engine was designed by the famous coachbuilder Fortunato Francone, the chassis was of generous dimensions to support the weight of the important 150 HP engine, with reinforced suspension that allowed it to absorb the engine vibrations, but to the detriment of damping on uneven terrain, the engine was quite silent compared to other diesel engines installed in other vehicles of that time. That first car was introduced to the President of Argentina Roberto M. Ortiz, who acquired it for the presidency.