For firing subaqueous blasts with safety fuse, only the guttapercha covered kinds are suitable. Great care must be taken to render the junction of the fuse and the detonator water-tight. A stronger detonator is required under water than in dry ground. Electric fuses offer not only a cheaper, but a far more certain and suitable means of firing in water. This means is now very generally employed. When tension currents are used, the insulation must be very good. In all cases, ample power should be possessed by the firing machine or battery.

The shattering class of explosives are very suitable for subaqueous-rock blasting. In many cases, their employment renders the boring of shot-holes unnecessary, an advantage of obviously great importance. When detached or projecting masses of rock have to be broken up, it is sufficient to place the charges upon them. Of course, when so applied, larger quantities of the explosive are required; but though the method is wasteful of explosive, it is very economical of labour and time. Even when large undetached masses of rock have to be removed, the same method may often be successfully followed. Suppose a level surface of rock, for example. A few heavy charges judiciously distributed over this surface will blow out craters of a considerable radius, and more or less fracture the rock in their immediate neighbourhood. A few other blasts then fired between these shattered points will break up the intervening solid portions. Sometimes the rock will be disintegrated to a considerable depth, and so broken up generally that it may be removed by dredging. By proceeding in this way, the whole of the rock may often be removed without any labour of boring.

Rock Blasting — Part 82

But when the rock is too tough to be removed in this way, recourse must be had to boring, though even when boring is necessary, an occasional “loose” shot may be found to be very efficacious.

Rock Blasting — Part 82

_Boring under Water._--The percussive drills, one of which, the Darlington, was described in a former chapter, may be used effectively under water. Compressed air is used as the motor fluid. The tripod stand, having its legs weighted to give it stability, is generally the most suitable support. These drills need the immediate attention of a diver. Sometimes the boring is carried on by hand from the deck of a vessel or from a raft provided for the purpose. The following description will give a general notion of the operations involved in subaqueous boring:--

Rock Blasting — Part 82