[Illustration: Pl. II. SAVERY'S STEAM ENGINE.]

Such was Newcomen's first conception of the _atmospheric engine_; and the contrivance had much, even at the first view, to recommend it. The power of such a machine would depend entirely on the magnitude of the piston; and being independent of a highly elastic steam, would not expose the materials to the destructive heat which was necessary for working Savery's engine. Supposing a perfect vacuum to be produced under the piston in the cylinder, an effective downward pressure would be obtained, amounting to 15 times as many pounds as there are square inches in the section of the piston.[11] Thus, if the base of the piston were 100 square inches, a pressure equal to 1500lbs. would be obtained.

The Steam Engine Familiarly Explained and Illustrated — Part 38

[Footnote 11: As the calculation of the power of an engine depends on the number of square inches in the section of the piston, it may be useful to give a rule for computing the number of square inches in a circle. The following rule will always give the dimensions with sufficient accuracy:--_Multiply the number of inches in the diameter by itself; divide the product by 14, and multiply the quotient thus obtained by 11, and the result will be the number of square inches in the circle._ Thus if there be 12 inches in the diameter, this multiplied by itself gives 144, which divided by 14 gives 10-4/14, which multiplied by 11 gives 115, neglecting fractions. There are, therefore, 115 square inches in a circle whose diameter is 12 inches.]

The Steam Engine Familiarly Explained and Illustrated — Part 38

(38.) In order to accomplish this design, two things were necessary: 1. To make a speedy and effectual vacuum below the piston in the descent; and 2. To contrive a counterpoise for the atmosphere in the ascent.

The Steam Engine Familiarly Explained and Illustrated — Part 38

The condensation of steam immediately presented itself as the most effectual means of accomplishing the former; and the elastic force of the same steam previous to condensation an obvious method of effecting the latter. Nothing now remained to carry the design into execution, but the contrivance of means for the alternate introduction and condensation of the steam; and Newcomen and Cawley were accordingly granted a patent in 1707, in which Savery was united, in consequence of the principle of condensation for which he had previously received a patent being necessary to the projected machine. We shall now describe the _atmospheric engine_, as first constructed by Newcomen:--