Let us pass on to the barrel-making shop. Rifle barrels are made from a solid round bar of steel, which is at first considerably shorter and stouter than the finished barrel will be. This steel bar is heated red-hot, and is passed between several pairs of rollers, which convert it outwardly into the required form. It has, however, afterwards to be bored and then rifled--that is, furnished with the spiral grooves within, which gives the bullet the necessary spin. Of course the barrel is by far the most important portion of a firearm, and the barrels of rifles are, at Enfield, tested and proved in the most ingenious and searching manner. The first proof takes place after the barrel has been bored, but before it is rifled. The barrels are loaded with cartridges of considerably greater weight both in powder and bullet than those which will be used in them when they are ready for service, and are enclosed in a sort of strong box which has one side open. They are then discharged through the open side into a heap of sand, and examined; but it is a rare event to find a barrel that has not been able to bear this test. The second proof, which takes place after the rifling, is of a similar character.

But these proofs are only to test the strength of a barrel; the test of its accuracy is a much more delicate operation. Of course the machinery by which it is bored and rifled works with the most admirable precision; but yet it is necessary to put this machine-work to trial. There are, amongst others, two highly ingenious methods for doing this. In the one case it is placed on a stand which is so constructed that on it the barrel can be made to revolve rapidly. The barrel is pointed towards a window, and in front of it is a fixed sight. The workman looks through it while it is revolving; and if the sight remains steady to his eye, that is a proof that the barrel may be said to be straight. But there is yet another method. The mechanism of this testing apparatus is rather difficult to describe, but is something of this fashion. The barrel is made to revolve as before; but this time there is inserted in it a spindle, on which is fixed a short arm with a point which touches very lightly the interior of the barrel. If there is any inequality, or if the barrel is not perfectly straight, this short arm is of course shaken, and when this is the case, the motion is further communicated to a long arm at the end of which is an indicator, which is looked at by the workman through a magnifying glass.

The Romance of Industry and Invention — Part 93