ANSI/ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy is an American National Standard published by ASHRAE that establishes the ranges of indoor environmental conditions to achieve acceptable thermal comfort for occupants of buildings. It was first published in 1966, and since 2004 has been updated every three to six years. The most recent version of the standard was published in 2020.

Organization of standard

The body of the standard consists of a foreword (describing changes made in the current version), eight sections and several normative appendices: Purpose Scope Definitions General requirements Conditions that provide thermal comfort Design compliance Evaluation of comfort in existing buildings References Normative Appendix A: Methods for determining operative temperature Normative Appendix B: Computer program for calculation of PMV/PPD Normative Appendix C: Procedure for Calculating Comfort Impact of Solar Gain on Occupants Normative Appendix D: Procedure for Evaluating Cooling Effect of Elevated Air Speed Using SET Informative Appendix E: Conditions That Provide Thermal Comfort Informative Appendix F: Use of Metabolic Rate Data Informative Appendix G: Clothing Insulation Informative Appendix H: Comfort Zone Methods Informative Appendix I: Local Discomfort and Variations with Time Informative Appendix J: Occupant-Controlled Naturally Conditioned Spaces Informative Appendix K: Sample Design Compliance Documentation Informative Appendix L: Measurements, Surveys, and Evaluations of Comfort in Existing Spaces: Parts 1 and 2 Informative Appendix M: Bibliography and Informative References Informative Appendix N: Addenda Description

ASHRAE 55

The informative appendices are not part of the standard, but provide additional information about terms and methods described within the standard, as well as a bibliography, and a description of the addenda incorporated from the previous version in the current version.

ASHRAE 55

Purpose

As described within the standard: "The purpose of the standard is to specify the combinations of indoor thermal environmental factors and personal factors that will produce thermal environmental conditions acceptable to a majority of the occupants within the space".

ASHRAE 55

Scope

The standard addresses the four primary environmental factors (temperature, thermal radiation, humidity, and air speed) and two personal factors (activity and clothing) that affect thermal comfort. It is applicable for:

healthy adults at atmospheric pressures in altitudes up to (or equivalent to) , people whose clothing insulation is between 0.0 and 1.5 clo, who are not wearing highly impermeable clothing, metabolic rates between 1.0 and 2.0 met, people who are neither sleeping nor reclining, for indoor spaces designed for occupancy of at least 15 minutes.

Definitions

Adaptive model

Adaptive model is a model that relates indoor design temperatures or acceptable temperature ranges to outdoor meteorological or climatological parameters.

Thermal comfort

Thermal comfort is the condition of mind that expresses satisfaction with the thermal environment and is assessed by subjective evaluation.

Occupant-controlled naturally conditioned spaces

A occupant-controlled naturally conditioned space is where the thermal conditions of the space are primarily regulated by occupant-controlled openings.

Predicted mean vote (PMV)

Predicted mean vote is an index that predicts the mean value of the thermal sensation votes (self-reported perceptions) of a large group of persons on a sensation scale expressed from -3 to +3 corresponding to the categories "cold," "cool," "slightly cool," "neutral," "slight warm," "warm," and "hot." The value of PMV can be calculated either using the code provided in Appendix B of the standard or can be freely calculated with either the CBE Thermal Comfort Tool for ASHRAE 55, with the Python package pythermalcomfort and with the R package comf.

Comfort zone

Comfort zone refers to the combinations of air temperature, mean radiant temperature (tr), and humidity that are predicted to be an acceptable thermal environment at particular values of air speed, metabolic rate, and clothing insulation (Icl)

Clothing insulation (Icl)

Clothing insulation is the resistance to sensible heat transfer provided by a clothing ensemble (expressed in units of clo, which is a unit to quantify the insulation provided by garments and clothing ensembles. 1 clo = 0.155 m2 °C/W (0.88 ft2·h·°F/Btu))

Metabolic rate (met)