The Hayden RR Bridge, is a truss bridge located in Springfield, Oregon, spanning over the McKenzie River. It initially served as a traditional railroad bridge, starting as part of the first transcontinental railroad in Utah, before moving to its current location as part of the Marcola line, whose primary use was the distribution of lumber. It later closed alongside the area's lumber mills, and became a pedestrian bridge in 2019. It is one of the few remaining wrought-iron, Phoenixville bridges still standing, and the oldest intact bridge in the state of Oregon.

Location

Hayden Bridge is located in Springfield, Oregon, near the intersection of the Marcola, Old Mohawk and Camp Creek roads. Its milepost was 649.50 on the Southern Pacific Railroad when it comprised part of the railroad during its use as a railroad bridge. The bridge spans the McKenzie river, where it runs parallel to a road bridge comprising part of Marcola road, which is also named Hayden Bridge. Nearby the bridge are the Eugene Water & Electric Board's (EWEB) water collection facilities.

Hayden Bridge (Springfield, Oregon)

Craftsmanship and design

Hayden Bridge is a fabricated truss bridge constructed of wrought iron. Today, fewer than 75 of such bridges exist. The bridge is also a Phoenix bridge, being a creation of Phoenix Bridge Works, and as such also incorporates Phoenix columns, a rare design where the bridge is composed of hollow wrought iron columns. Such a design was an innovation in wrought iron bridge technology, created before steel bridges came to effectively replace wrought iron bridges. The bridge is one of only two Phoenixville bridges still in existence in the Pacific Northwest.

Hayden Bridge (Springfield, Oregon)

In terms of its truss, the bridge employs a through-truss design; more specifically, it uses a double-intersection Pratt truss, or a Whipple-Murphy truss, also a rare design. The truss is pin-connected, with the columns riveted together at their phalanges to form hollow beams. Because of the multiple web systems employed by this design, this causes the structure to be statically indeterminate. It is also the first bridge design to be calculated to support its intended load using scientific processes.

Hayden Bridge (Springfield, Oregon)

The bridge also incorporates cast-iron connections and decorative pieces, including ornamental medallions and railroad brake-wheel designs. The brake-wheel designs are located on the corner portal brackets, whilst the medallions are located at the crossings of the diagonal portal bracings. These elements, along with the nameplates, compose the only cast-iron parts of the bridge.

The bridge currently sits atop granite slabs, which are in turn set in concrete abutments.

History

In 1882, the bridge was fabricated by Clarke, Reeves & Company, Phoenixville Bridge Works in Phoenixville, Pennsylvania. It was then bought and constructed by Central Pacific Railroad with the intent for it to span over the Bear River near Corinne, Utah, where it was erected as a trestle bridge in 1882, replacing an older wooden bridge as part of the first transcontinental railroad.

During the turn of the century, the bridge was bought and shipped over 1,000 miles away to be re-erected in its current location over the McKenzie River in Springfield, Oregon by Southern Pacific Railroad. It was moved to Springfield and reassembled in its current location along the Southern Pacific Railroad line in 1901. The bridge was then leased to the Oregon and California Railroad as part of its branch line (which became known as the Marcola Branch), and used as part of a logging railroad from then until 1979. Traffic increased in 1912 due to the prohibition of log driving down the McKenzie River, which forced all traffic to go through the railroad.

During the bridge's time as a route for logging and railroad tie shipments, the operations of the rail line supported by the bridge slowed down as the operations of its client mills ceased. This was caused by the shutting down of the Booth-Kelly Lumber Company mill at Wendling, Oregon in 1946, which was the only location that the line served until that point, which led traffic across the bridge to dwindle. This can mostly be attributed to the practice of cutting down trees too quickly, more than they were replaced via replanting.