The Mortier de 58 T N°1 sometimes referred to as Lance Torpilles was an early French medium trench mortar of World War I. Built in small numbers it was a transitional type in the development of later French mortars.
Background
The majority of military planners before the First World War were wedded to the concept of fighting an offensive war of rapid maneuver which before mechanization meant a focus on cavalry and light horse artillery firing shrapnel shells at formations of troops in the open. The problem facing the combatants was that their light field guns were designed for direct fire and only had limited angles of elevation and weren't capable of providing the high-angle indirect fire needed to deal with enemy troops in dug-in positions.
The simple expedient was to elevate the guns by having them fire from pits but the size and weight of the guns were excessive and pack animals couldn't move the guns in the trenches or across the shell-pocked quagmire of no man's land. What the theorists hadn't foreseen was that land mines, trenches, barbed wire, and machine guns would rob them of mobility and as the Western Front stagnated into trench warfare the light field guns that the combatants went to war with began to show their limitations.
Often defenders would wait out a preparatory artillery bombardment in reinforced dugouts and once the bombardment had lifted they would man their trenches and machine-gun nests in anticipation of an enemy attack across no man's land. Barbed wire was often used to channel attackers away from vulnerable areas of the defender's trenches and funnel attackers into predefined kill zones where overlapping fields of machine-gun fire could be brought to bear or to hold attackers at a safe distance to call in defensive artillery fire. The machine-gun nests could be constructed of sandbags, timber, corrugated metal, and concrete with overhead protection. For infantry advancing across no man's land, all they may see is a small horizontal opening at waist level, with just the top of the gun shield showing. Attacking infantry would have to close on these positions while under fire and destroy them with rifle fire, grenades, and flamethrowers.
The problem for the French Army was they lacked light, portable, simple, and inexpensive firepower that could be brought with them to overcome enemy machine gun nests and wire entanglements. Early on they experimented with crossbows, catapults, and slingshots to propel hand grenades with limited success. Unlike the Germans the French lacked portable mortars like the 7.58 cm Minenwerfer, 17 cm mittlerer Minenwerfer or 25 cm schwere Minenwerfer. The mortars that the French did have the Obusier de 155 mm C modèle 1881 and Mortier de 220 mm modèle 1880 were siege artillery designed to arm France's forts that were much heavier than their opponents and not designed to be mobile.
History
In 1914, Major Duchêne of the Engineers (of the 33rd Corps belonging to X Army) began experimenting with a simple improvised tube mortar made from discarded Canon de 75 mle 1897 cases at the end of a pole. He found he was able to build a simple high-explosive fragmentation projectile that could be used as an anti-personnel weapon and to clear barbed wire entanglements. On November 7, 1914, Commander Duchêne was sent to the Bourges pyrotechnics school by order of General Joseph Joffre to develop a mortar under the direction of General Dumézil, inspector of artillery studies and testing.
Design
The basic specification was for a light, mobile, and inexpensive mortar which could fire a projectile to a range of using a smokeless powder propellant charge. The requirement also specified a weapon that could be produced from non-strategic materials, using simple production methods and produced by companies not currently engaged in war work.
The launcher was a simple pole 58 mm (2.3 in) in diameter with a round weighted base at one end and a hollow cup that held the propellant charge at the other. An adjustable sleeve was attached to the pole that connected to a crescent-shaped elevation mechanism with holes for elevation. The elevation mechanism then fit into the center of an A-shaped bi-pod and elevation was set by pushing a bolt through the elevation hole. The 60 g (2.1 oz) propellant charge was then inserted in the muzzle and the projectile slid onto the end of the launch tube. The mortar was fired by pulling on a lanyard which was attached to a friction igniter embedded in the propellant.