India-based Neutrino Observatory (INO) is a particle physics research project under construction to primarily study atmospheric neutrinos in a deep cave under INO Peak near Theni, Tamil Nadu, India. This project is notable in that it is anticipated to provide a precise measurement of neutrino mixing parameters. The project is a multi-institute collaboration and one of the biggest experimental particle physics projects undertaken in India.
The project was originally to be completed in 2015 at an estimated cost of 1,500 crores(15 billion or 209.7 million), has been cleared by the Ministry of Environment (India) for construction in the Bodi West Hills Reserved Forest in the Theni district of Tamil Nadu. Although delayed, the project was underway .
When completed, the main magnetised iron calorimeter (ICAL) experiment will include the world's largest magnet, four times larger than the 12,500-tonne magnet in the Compact Muon Solenoid detector at CERN in Geneva, Switzerland.
Iron Calorimeter (ICAL) Detector
The main experiment proposed at INO is the Iron-Calorimeter Detector which aims to probe the Earth matter effects on the propagation of atmospheric neutrinos and to determine neutrino oscillation parameters in the 2-3 oscillation sector. ICAL will be a 50000 tonne magnetised detector with iron as the passive detector element and resistive plate chambers (RPCs) as the active detector elements. i.e., the neutrinos will interact with the iron to produce final state particles. The RPCs will detect those final state particles which have charge and will record the signals and these signals which have position and timing information will help us reconstruct the tracks and/or showers and thus the energy and directions of the final state particles and also the incident neutrino.
The ICAL design is mostly based on the Monolith detector . ICAL detector will have three modules, each module will have 151 layers of iron and 150 layers of RPCs, stacked one over the other. The dimension of the entire detector will be 48 m X 16 m X 14.5 m. The detector, owing to its huge size will require around 30000 glass RPCs for the purpose of charged particle detection. ICAL being a neutrino detector will be situated underground to reduce the cosmic ray muon signal.
The location of INO has attracted a lot of attention from the neutrino physics community as the distance between INO and CERN is very close to "magic baseline" – a distance at which the effect of the CP phase on the measurement of is minimal. But the major physics advantage of INO ICAL is its ability to measure neutrino mass hierarchy via studying atmospheric neutrinos. Currently ICAL is the only proposed magnetised detector which can resolve mass hierarchy via studying the survival of muon neutrinos and anti-neutrinos.
The primary goals of the ICAL are the following:
Unambiguous and precise determination of neutrino oscillation parameters using atmospheric neutrinos. Study of matter effects through electric charge identification, that may lead to the determination of the unknown sign of one of the mass differences. Study of charge-conjugation and charge parity (CP) violation in the leptonic sector as well as possible charge-conjugation, parity, time-reversal (CPT) violation studies. Study of Kolar events, possible identification of very-high energy neutrinos and multi-muon events.
Unlike Monolith experiment, ICAL detector will have iron plates of thickness as passive detectors, with glass RPCs in between as active detectors.
A prototype of the ICAL detector with 14 layers, measuring 1 m × 1 m × 1 m is already operational in the VECC, Kolkata. The 35 ton prototype is set up over ground to track cosmic muons.
In 2008, INO started a graduate training programme leading to PhD degree in high energy physics to provide expert training to students in the areas of detector building and neutrino physics.
A prototype called mini-ICAL, with 1/600 of the weight of ICAL, has been constructed to gain experience in the building of a large-scale electromagnet, to study the detector performance, and to test the ICAL electronics in the presence of fringe magnetic fields. This 4m × 4m × 1.1m detector has 11 iron layers, and 20 RPCs of 1.95m x 1.92m have been inserted in the 10 layers of gaps, in the central region. Mini-ICAL has been in operation since 2018, and is collecting cosmic ray muon data.