We shall go more into this subject when we come to archways and vaulted roofs, &c.
First draw outline of the niche _GFDBA_ (Fig. 193), then at its base draw square and circle _GOA_, _S_ being the point of sight, and divide the circumference of the circle into the required number of parts. Then draw semicircle _FOB_, and over that another semicircle _EOC_. The manner of drawing them is shown in Fig. 192. From the divisions on the circle _GOA_ raise verticals to semicircle _FOB_, which will divide it in the same way. Divide the smaller semicircle _EOC_ into the same number of parts as the others, which divisions will serve as guiding points in drawing the curves of the dome that are drawn towards _D_, but the shading must assist greatly in giving the effect of the recess.
In Fig. 192 will be seen how to draw semicircles in perspective. We first draw the half squares by drawing from centres _O_ of their diameters diagonals to distance-point, as _OD_, which cuts the vanishing line BS at _m_, and gives us the depth of the square, and in this we draw the semicircle in the usual way.
First draw a section of the dome ACEDB (Fig. 194) the shape required. Draw _AB_ at its base and _CD_ at some distance above it. Keeping these as central lines, form squares thereon by drawing _SA_, _SB_, _SC_, _SD_, &c., from point of sight, and determining their lengths by diagonals _fh_, _f·h·_ from point of distance, passing through _O_. Having formed the two squares, draw perspective circles in each, and divide their circumferences into twelve or whatever number of parts are needed. To complete the figure draw from each division in the lower circle curves passing through the corresponding divisions in the upper one, to the apex. But as these are freehand lines, it requires some taste and knowledge to draw them properly, and of course in a large drawing several more squares and circles might be added to aid the draughtsman. The interior of the dome can be drawn in the same way.
In Fig. 195 are sixteen cylinders or columns standing in a circle. First draw the circle on the ground, then divide it into sixteen equal parts, and let each division be the centre of the circle on which to raise the column. The question is how to make each one the right width in accordance with its position, for it is evident that a near column must appear wider than the opposite one. On the right of the figure is the vertical scale _A_, which gives the heights of the columns, and at its foot is a horizontal scale, or a scale of widths _B_. Now, according to the line on which the column stands, we find its apparent width marked on the scale. Thus take the small square and circle at 15, without its column, or the broken column at 16; and note that on each side of its centre _O_ I have measured _oa_, _ob_, equal to spaces marked 3 on the same horizontal in the scale _B_. Through these points _a_ and _b_ I have drawn lines towards point of sight _S_. Through their intersections with diagonal _e_, which is directed to point of distance, draw the farther and nearer sides of the square in which to describe the circle and the cylinder or column thereon. I have made all the squares thus obtained in parallel perspective, but they do not represent the bases of columns arranged in circles, which should converge towards the centre, and I believe in some cases are modified in form to suit that design.