_Pilaster._ Though this term is generally applied to what may be called a flat-sided pillar against a wall, or a flat half pillar, in wood-carving it means quite as often a perpendicular border in relief. Like borders, pilasters are used in many ways in decoration, as on walls, bureaux, cabinets, sideboards, tables, or wherever a long "strip" is to be filled.
_Base Moulding._ This is generally a border which is the lower portion of a piece of furniture, etc. Thus, if there is a panel and frame, and under this, just over the "feet," a carved strip, it is a base moulding. Narrow fillets on these may be also decorated by stamping.
_Sideboard or Buffet._ A piece of furniture eminently adapted to ornament. It may be made with a back or with shelves, niches, or a cabinet placed on it instead of a back.
_Alms Boxes, Money Boxes._ These are made up for churches, generally after Gothic designs, and afford a wide range of design.
_Lectern._ A church reading desk. This has always been a favourite subject with wood-carvers, Fig. 78.
_Ends of Pews._ A favourite subject for carvers in the days of old, _vide_ Fig. 80.
_Porte-papier._ A very useful article to carry paper, or a sketchbook, or to press leaves and flowers and convey them home. Take two pieces of board, from one-third to one-half an inch in thickness, and six inches by eight in size, more or less as may be desired. The paper is placed between these boards and the whole secured with a hand-strap. It is usual to carve a flower pattern on these.
_Ring or Circular Boxes._ Take a board, of any thickness, _e.g._ one of two inches, and make of it a disc or circle, using the steel fret saw, Fig. 16; then marking out another circle within this, saw out a ring about three-quarters of an inch in thickness. Adapt to this a bottom and lid, both, of course, also circular. It will be like what is known as a cheese box. To double the depth saw out two rings and glue them together. This will give four inches depth. Boxes may thus be made of any shape, such as a fish, and then carved.
_Photograph or Mirror Frames, or Mounts._ Take a piece of thin board, six inches by four or five, or any size required. Cut out of one corner of this as much as will be required for the photograph or mirror, leaving enough wood for a pattern. These have become very popular of late, Fig. 79.