The Tecnam P2012 Traveller is an eleven-seat utility aircraft designed and manufactured by the Italian company Costruzioni Aeronautiche Tecnam, based in Capua, Italy, near Naples.
In 2009, Cape Air, a commuter airline based in Massachusetts, asked Tecnam for a new aircraft meeting their needs. The project was publicly revealed in April 2011. In November 2015, Cape Air signed a letter of intent to order 100 aircraft. On 21 July 2016, the first prototype performed its maiden flight. In October 2018, testing had been completed, and type certification from European Aviation Safety Agency was received during December 2018. The first customer delivery occurred during March 2019. American Federal Aviation Administration certification was awarded in August 2019, and Cape Air received its first two aircraft via transatlantic ferry flight in October 2019.
It is Tecnam's first commercial aircraft and after its introduction as a commuter airliner, it could be used for VIP, cargo, parachuting and medevac. The company can produce up to 40 aircraft per year. Tecnam forecasts a demand for 11,500 short-haul commuter aircraft between 2018 and 2028.
Development
In 2009, Cape Air, a Massachusetts-based commuter airline operating in the Caribbean and New England, was looking for a successor for its fleet of 83 Cessna 402s. After being rebuffed by aircraft manufacturers Cessna and Piper, Cape Air approached Italian manufacturer Tecnam, specialised in trainers and private aircraft but interested in a commercial aircraft. The P2012 is Tecnam's most complex and important programme, "the first time we've developed an aircraft from the operator's point of view".
In April 2011, the P2012 project was publicly unveiled at AERO Friedrichshafen by Tecnam and Cape Air.
Funding came from private sources and the Italian government.
On 1 April 2016, the first completed prototype was rolled out. It conducted its maiden flight on 21 July 2016.
By April 2017, the first prototype was flown more than 100 hours while the second was set to join during September, targeting a December 2018 certification. The nearly production standard second prototype seats up to nine passengers and conducted its first flight on 22 December 2017; by then the first prototype had flown more than 250 hours.
By August 2018, certification was on track for the year end with 400 hours flown, while the backlog attained 130 and three aircraft were in production. In October 2018, testing was completed after 500 flight hours between the two prototypes. After 600 hours flown by the two prototypes, European type certification was awarded on 20 December 2018, including in icing conditions; approval from the US authority was expected to follow shortly.
The first example was handed over in March 2019. In July, Boeing was selected as the sole provider of aftermarket spare parts and distribution services through its Aviall distribution network. By then, Cape Air accepted the first two P2012, the last milestone before final delivery, after having reviewed their manuals, inspected and flight tested them. The FAA granted its type approval on 11 July, while Cape Air awaits airworthiness certifications for each individual aircraft. On 16 October, 30 years after Cape Air's first flight, the company unveiled its first two aircraft, intending to deploy them in early December on revenue flights. Zil Air in Mahe, Seychelles, received its first P2012 on 29 November 2019.
On 22 February 2020, Cape Air started revenue service from Hyannis, Massachusetts, to Nantucket Island, before Hyannis-Boston and Boston-Nantucket with five P2012s, while four were being ferried in late February. The carrier evaluates their performance in New England before operating it from Marion, Illinois, to Nashville and St Louis from 4 March, then maybe deploying it in Billings, Montana. The carrier expects to have 20 in the fleet by the end of 2020.
Market
At the April 2011 unveiling, Tecnam planned VIP, cargo, parachuting and medevac variants after the commuter airliner introduction in 2015.
In November 2015, Cape Air signed a letter of intent to order 100 aircraft while three prototypes were being built at Tecnam's plant in Capua, Italy.
Tecnam aimed for 25 to 35 deliveries in 2019 and more in following years. Six new customers from Argentina, the South Pacific region and Russia had placed orders at the April 2017 AERO Friedrichshafen. Tecnam extended its Capua factory for a P2012 production area, capable of producing up to 40 aircraft per year. The delivery schedule for the first 20 aircraft to Cape Air was firmed on 21 September 2017: these first deliveries are due in January 2019 after EASA and FAA certification.
