In plane Euclidean geometry, a rhombus (: rhombi or rhombuses) is a quadrilateral whose four sides all have the same length. Another name is equilateral quadrilateral, since equilateral means that all of its sides are equal in length. The rhombus is often called a "diamond", after the diamonds suit in playing cards which resembles the projection of an octahedral diamond, or a lozenge, though the former sometimes refers specifically to a rhombus with a 60° angle (which some authors call a calisson after the French sweet — also see Polyiamond), and the latter sometimes refers specifically to a rhombus with a 45° angle.

Every rhombus is simple (non-self-intersecting), and is a special case of a parallelogram and a kite. A rhombus with right angles is a square.

Rhombus

Etymology

The word "rhombus" comes from , meaning something that spins, which derives from the verb , romanized: , meaning "to turn round and round." The word was used both by Euclid and Archimedes, who used the term "solid rhombus" for a bicone, two right circular cones sharing a common base.

Rhombus

The surface we refer to as rhombus today is a cross section of the bicone on a plane through the apexes of the two cones.

Rhombus

Characterizations

A simple (non-self-intersecting) quadrilateral is a rhombus if and only if it is any one of the following: a parallelogram in which a diagonal bisects an interior angle a parallelogram in which at least two consecutive sides are equal in length a parallelogram in which the diagonals are perpendicular (an orthodiagonal parallelogram) a quadrilateral with four sides of equal length (by definition) a quadrilateral in which the diagonals are perpendicular and bisect each other a quadrilateral in which each diagonal bisects two opposite interior angles a quadrilateral ABCD possessing a point P in its plane such that the four triangles ABP, BCP, CDP, and DAP are all congruent a quadrilateral ABCD in which the incircles in triangles ABC, BCD, CDA and DAB have a common point

Basic properties

Every rhombus has two diagonals connecting pairs of opposite vertices, and two pairs of parallel sides. Using congruent triangles, one can prove that the rhombus is symmetric across each of these diagonals. It follows that any rhombus has the following properties: Opposite angles of a rhombus have equal measure. The two diagonals of a rhombus are perpendicular; that is, a rhombus is an orthodiagonal quadrilateral. Its diagonals bisect opposite angles.

The first property implies that every rhombus is a parallelogram. A rhombus therefore has all of the properties of a parallelogram: for example, opposite sides are parallel; adjacent angles are supplementary; the two diagonals bisect one another; any line through the midpoint bisects the area; and the sum of the squares of the sides equals the sum of the squares of the diagonals (the parallelogram law). Thus denoting the common side as a and the diagonals as p and q, in every rhombus

Not every parallelogram is a rhombus, though any parallelogram with perpendicular diagonals (the second property) is a rhombus. In general, any quadrilateral with perpendicular diagonals, one of which is a line of symmetry, is a kite. Every rhombus is a kite, and any quadrilateral that is both a kite and parallelogram is a rhombus.

A rhombus is a tangential quadrilateral. That is, it has an inscribed circle that is tangent to all four sides.

Diagonals

The length of the diagonals p = AC and q = BD can be expressed in terms of the rhombus side a and one vertex angle α as

and

These formulas are a direct consequence of the law of cosines.

Inradius

The inradius (the radius of a circle inscribed in the rhombus), denoted by , can be expressed in terms of the diagonals and as

or in terms of the side length and any vertex angle or as

Area

As for all parallelograms, the area K of a rhombus is the product of its base and its height (h). The base is simply any side length a:

The area can also be expressed as the base squared times the sine of any angle:

or in terms of the height and a vertex angle:

or as half the product of the diagonals p, q:

or as the semiperimeter times the radius of the circle inscribed in the rhombus (inradius):

Another way, in common with parallelograms, is to consider two adjacent sides as vectors, forming a bivector, so the area is the magnitude of the bivector (the magnitude of the vector product of the two vectors), which is the determinant of the two vectors' Cartesian coordinates: K = x1y2 – x2y1.