We will send necessary instructions, so that any one of medium skill can put them in at the mill.

Give names, post office, county, and shipping point plainly, and how you wish to pay us. Money sent by Post Office Order is safe, and payment with the order always saves delay and trouble of making out bills, book-entries, &c. To those whose faith is not sufficient, will send the irons on trial or as circumstances best suggest at the time.

Descriptive Pamphlet of the Richmond Mill Furnishing Works — Part 38

The safe arrival of them is guaranteed. Every iron is warranted.

Descriptive Pamphlet of the Richmond Mill Furnishing Works — Part 38

These two cuts are intended to represent the self-tram irons for our under-runner mills. Fig. 1 shows the form of the outside, as it appears before being bedded in the centre, and iron back of the runner stone. Fig. 2 is a view of the inside, showing where the point of the spindle and driver rest.

Descriptive Pamphlet of the Richmond Mill Furnishing Works — Part 38

This cut is a sectional view of our improved oil bush. A shows the mill spindle, B B, B B, is the collar or part that turns with the spindle and is secured firmly to it. The parts E E E E, show the upwardly projecting sleeve at some distance from and encircling the spindle or shaft, and forms the inner wall of the oil chamber. C C C C are two of the four followers or segments lined with the best anti-friction metal. The wedges N N, are raised or lowered as circumstances require by the four metal screws, two of them being shown at S S; by this means the followers and spindle are adjusted with great precision. D D D D forming the outer wall of the chamber, and E E E E its bottom and inner part, gives us a complete oil well in which the followers, collar of spindle, &c., are immersed. THE OPERATION is as follows: the rotating shaft or spindle carries with it the collar or sleeve bearing and produces centrifugal force in the chamber, by which the oil is driven up the sides of the passages and followers; the bearing is thus made to move constantly in oil. No oil can escape except when necessary to draw off at the orifice provided with the thumb screw K, when a fresh supply is needed. This simple self-oiling arrangement is the best thing in use for fast running upright bearings of any kind.

The object of the invention which is herewith illustrated, is to enable the spindles of mill-stones to be adjusted with perfect accuracy, and at the same time furnish bearings of anti-friction materials, which may be kept constantly and perfectly lubricated, and from which all extraneous dust or grit, calculated to aggravate friction, may be kept excluded.