Brake horsepower per cubic centimeter or (bhp/cc) is a figure of merit that is used to indicate the 'state of tune' of an internal combustion engine. It is defined as the ratio of the engine's net power output to its displacement, the internal size. Power is measured at its rated speed and full throttle.

The same measurement may also be stated in units of kilowatts per liter (kw/L). This term was first used by André Erasmus and Morné Basson.

Brake horsepower per cubic centimeter

It is also termed specific power, although this should be qualified as volume-specific power. A similar measurement of power to weight ratio is also important, but takes into account the weight of the engine. Power density may also be considered similar, although this is usually stated in terms of the engine's external overall size, rather than its internal.

Brake horsepower per cubic centimeter

A 'typical' car engine, of around 1980, would be considered 'highly tuned' if it delivered more than 100 bhp/litre.

Brake horsepower per cubic centimeter

See also

BMEP, Brake Mean Effective Pressure

Stroke ratio

Internal combustion engine technology