FIG. 122.--Elastic spiral wing, which twists and untwists during its action, to form _a mobile helix or screw_. This wing is made to vibrate by steam by a direct piston action, and by a slight adjustment can be propelled vertically, horizontally, or at any degree of obliquity.
_a_, _b_, Anterior margin of wing, to which the neuræ or ribs are affixed. _c_, _d_, Posterior margin of wing crossing anterior one. _x_, Ball-and-socket joint at root of wing; the wing being attached to the side of the cylinder by the socket. _t_, Cylinder. _r_, _r_, Piston, with cross heads (_w_, _w_) and piston head (_s_). _o_, _o_, Stuffing boxes. _e_, _f_, Driving chains. _m_, Superior elastic band, which assists in elevating the wing. _n_, Inferior elastic band, which antagonizes _m_. The alternate stretching of the superior and inferior elastic bands contributes to the continuous play of the wing, by preventing dead points at the end of the down and up strokes. The wing is free to move in a vertical and horizontal direction and at any degree of obliquity.--_Original._]
This leads me to conclude that very large wings may be driven with a comparatively slow motion, a matter of great importance in artificial flight secured by the flapping of wings.
_How to construct an artificial Wave Wing on the Insect type._--The following appear to me to be essential features in the construction of an artificial wing:--
The wing should be of a generally triangular shape.
It should taper from the root towards the tip, and from the anterior margin in the direction of the posterior margin.
It should be convex above and concave below, and slightly twisted upon itself.
It should be flexible and elastic throughout, and should twist and untwist during its vibration, to produce figure-of-8 curves along its margins and throughout its substance.
Such a wing is represented at fig. 122, p. 239.
If the wing is in more than one piece, joints and springs require to be added to the body of the pinion.
In making a wing in one piece on the model of the insect wing, such as that shown at fig. 122 (p. 239), I employ one or more tapering elastic reeds, which arch from above downwards (_a b_) for the anterior margin. To this I add tapering elastic reeds, which radiate towards the tip of the wing, and which also arch from above downwards (_g_, _h_, _i_). These latter are so arranged that they confer _a certain amount of spirality_ upon the wing; the anterior (_a b_) and posterior (_c d_) margins being arranged in different planes, so that they appear to cross each other. I then add the covering of the wing, which may consist of india-rubber, silk, tracing cloth, linen, or any similar substance.