_Compound Wave Wing of the Author._--In order to render the movements of the wing as simple as possible, I was induced to devise a form of pinion, which for the sake of distinction I shall designate the _Compound Wave Wing_. This wing consists of two wave wings united at the roots, as represented at fig. 126. It is impelled by steam, its centre being fixed to the head of the piston by a compound joint (_x_), which enables it to move in a circle, and to rotate along its anterior margin (_a b c d_; _A_, _A´_) in the direction of its length. The circular motion is for steering purposes only. The wing rises and falls with every stroke of the piston, and the movements of the piston are quickened during the down stroke, and slowed during the up one.
During the up stroke of the piston the wing is very decidedly convex on its upper surface (_a b c d_; _A_, _A´_), its under surface being deeply concave and inclined obliquely upwards and forwards. It thus evades the air during the up stroke. During the down stroke of the piston the wing is flattened out in every direction, and its extremities twisted in such a manner as to form two screws, as shown at _a´ b´ c´ d´_; _e´ f´ g´ h´_; _B_, _B´_ of figure. The active area of the wing is by this means augmented, the wing seizing the air with great avidity during the down stroke. The area of the wing may be still further increased and diminished during the down and up strokes by adding joints to the body of the wing. The degree of convexity given to the upper surface of the wing can be increased or diminished at pleasure by causing a cord (_i j_; _A_, _A´_) and elastic band (_k_) to extend between two points, which may vary according to circumstances. The wing is supplied with vertical springs, which assist in slowing and reversing it towards the end of the down and up strokes, and these, in conjunction with the elastic properties of the wing itself, contribute powerfully to its continued play. The compound wave wing produces the currents on which it rises. Thus during the up stroke it draws after it a current, which being met by the wing during its descent, confers additional elevating and propelling power. During the down stroke the wing in like manner draws after it a current which forms an eddy, and on this eddy the wing rises, as explained at p. 253, fig. 129. The ascent of the wing is favoured by the superimposed air playing on the upper surface of the posterior margin of the organ, in such a manner as to cause the wing to assume a more and more oblique position with reference to the horizon. This change in the plane of the wing enables its upper surface to avoid the superincumbent air during the up stroke, while it confers upon its under surface a combined kite and parachute action. The compound wave wing leaps forward in a curve both during the down and up strokes, so that the wing during its vibration describes a waved track, as shown at _a_, _c_, _e_, _g_, _i_ of fig. 81, p. 157. The compound wave wing possesses most of the peculiarities of single wings when made to vibrate separately. It forms a most admirable elevator and propeller, and has this advantage over ordinary wings, that it can be worked without injury to itself, when the machine which it is intended to elevate is resting on the ground. Two or more compound wave wings may be arranged on the same plane, or superimposed, and made to act in concert. They may also by a slight modification be made to act horizontally instead of vertically. The length of the stroke of the compound wave wing is determined in part, though not entirely by the stroke of the piston--the extremities of the wing, because of their elasticity, moving through a greater space than the centre of the wing. By fixing the wing to the head of the piston all gearing apparatus is avoided, and the number of joints and working points reduced--a matter of no small importance when it is desirable to conserve the motor power and keep down the weight.