John M. "Jack" Carpenter was an American nuclear engineer known as the originator of the technique for utilizing accelerator-induced intense pulses of neutrons for research and developing the first spallation slow neutron source based on a proton synchrotron, the Intense Pulsed Neutron Source (IPNS). He died on 10 March 2020.<ref name="AAI">Argonne Accelerator Institute: IPNS: Intense Pulsed Neutron Source (operation: 1982 - 2008), Argonne Accelerator History Document Collection, http://www.aai.anl.gov/history/project_pages/ipns.html, accessed November 16, 2013.</ref>
Education
Carpenter earned the Bachelor of Science degree in Engineering Science at Pennsylvania State University in 1957 and the Master of Science and Doctor of Philosophy degrees in Nuclear Engineering at the University of Michigan in 1958 and 1963, respectively. His dissertation is titled Prediction and Measurement of Neutron Chopper Burst Shapes.University of Michigan Board of Regents: Proceedings of the Board of Regents (1963–1966), 1964, p. 208, http://quod.lib.umich.edu/u/umregproc/ACW7513.1963.001?rgn=main;view=fulltext, accessed November 11, 2013.
Career
Following completion of his Ph.D., Carpenter took a Post-Doctoral Fellowship at the University of Michigan Institute for Science and Technology in Ann Arbor, Michigan, from 1963 to 1964.Department of Nuclear Engineering and Radiological Sciences at the University of Michigan: A Short Departmental History, http://www.engin.umich.edu/ners/about/pubs/files/ners-history, n.d., accessed November 11, 2013. In 1964 he joined the UM faculty as an assistant professor in the Department of Nuclear Engineering; he was promoted to full professor in 1973.
In 1975, Carpenter moved to the Argonne National Laboratory, where he developed the first-ever pulsed Spallation Neutron Source for neutron scattering, the ZGS (Zero Gradient Synchrotron) Intense Neutron Generator Prototype (ZING-P), which then led in 1981 to the construction of the Intense Pulsed Neutron Source (IPNS) used in a broad range of neutron research.Jack M. Holl: Argonne National Laboratory, 1946-96, University of Illinois Press, Urbana and Chicago, Ill., 1997, pp. 412, 443. Internationally known as "Dr. Spallation," he helped develop other sources, including the Japan Atomic Energy Research Institute (JAERI) Multiprogram Research Facility, the European Spallation Source in Sweden; and smaller scale sources at the Institute for Science and International Security in the UK, the Kō Enerugī Kasokuki Kenkyū Kikō (KEK) Neutron Science Laboratory (KENS) in Japan, the Los Alamos Neutron Science Center (LANSCE) at the Los Alamos National Laboratory (LANL), and the Swiss Spallation Neutron Source (SINQ) in Switzerland. In 1977 he and colleagues Rex G. Fluharty of LANL, Motoharu Kimura of Japan, and Leo C. W. Hobbis of the UK cofounded the International Collaboration on Advanced Neutron Sources (ICANS), a forum for collaborating on neutron research and innovative neutron systems.
During his career, Carpenter has held a number of term appointments at public and private institutions, including Visiting Scientist at Phillips Petroleum Company, Nuclear Technology Branch, Idaho Falls, Idaho, Fall 1965; Argonne National Laboratory, Solid State Science Division, 1971–1972, 1973; Los Alamos Scientific Laboratory, Physics Division, 1973; and the Japanese Laboratory for High Energy Physics, Kō Enerugī Kasokuki Kenkyū Kikō, (KEK), 1982 and 1993. He has also served as senior physicist and manager for the Argonne National Laboratory, Solid State Science Division, Intense Pulsed Neutron Source Project, 1975–1978; technical director for the Intense Pulsed Neutron Source Project, 1978; senior technical advisor for the Oak Ridge National Laboratory, Spallation Neutron Source project, Experimental Facilities Division, 1998, and the Rutherford-Appleton Laboratory, periodically since 1997; and as adjunct professor of nuclear engineering and member of the graduate faculty of Iowa State University, 1987–1989.