Fig. CXI. illustrates the adjustment of heddle (mail) and lingo through the journal, _J_, by means of the heavy knot at _b_. This knot must be large enough not to pass through the hole of the journal. The average measures for the present drawing are as follows:
Lingo, _f_ to _g_ = 9 inches. Heddle, _e_ to _f_ = 8 " _c_ to _d_ = 10 " Mail, _d_ to _e_ = 6/8 " Height of journal, _b_ to _c_ = 1-1/8 inches. Connecting cord of heddle to harness-cord, _a_ to _b_ = 6 inches.
This drawing will explain the principle of raising the warp either by means of the harness-board, (arrow 1), or by means of the knot through raising the journal, (arrow 2). If raised by means of the harness-cord, the connecting heddle slides upwards in the hole provided for it in the journal; or the journal takes the place of a common comber-board; but if the journal be used for raising, the knot, _b_, will rise with it, carrying the heddle the same as before, the harness-cords becoming slack by this movement.
In Fig. CVIII., p. 73, the journals are arranged as follows:
1st journal, } for ground, { White, 1st set of threads. } For repeat, 2d " } { Olive, 3d " " } -- 238 times 3d " } for figure, { Red, 2d " " } over. 4th " } { Black, 4th " " }
In the same drawing are also represented the first eight heddles (in both divisions), as connected with harness-cords 1, 2, 3, 4, 5, 6, 7, 8; also the last four heddles of the rear journal (fourth) connected with their corresponding cords, 404, 408, 412, 416.
The first row (1 to 8) illustrates the principle of tying-up the harness and the leasing of the heddles; whereas the four heddles in the rear (404, 408, 412, and 416) show the practical commencement of the tie-up, _i. e._, four neck-cords in succession to four heddles of the journal.
_A_ represents bottom-board in the machine where the neck-cords for the ground harness-cords pass through. _B_, the bottom-board in the machine where the neck-cords for the figure harness-cords pass through.
In Fig. CIX., showing the lifter-boards, _A_ is also used for the ground, and _B_ for the figure; 26 rows of the machine are shown for explaining the tie-up for a texture known as “extra fine,” or equal to 832 heddles in the width of loom (one yard).