=Hop Sacking.= A coarse bagging made commonly of a combination of hemp and jute, used for holding hops during transportation. The name hop sacking is also applied to a variety of woolen dress goods made from different classes of yarn. It is made of carded woolen fabric of the plainest kind. The cloth is characterized by an open weave, and a square check-like mesh, the structure being designed to imitate that of the coarse jute bagging. It has very little finish, is usually dyed in solid colors, and is used for women's and children's dresses.
=Jeans.= Cotton or woolen coarse twilled fabric. In cotton used for linings, in wool for men's cheap clothing. The name is from a Genoese coin, relating to the price of the cloth; so much for one jean.
=Kersey.= A very heavy, felted, satin finish woolen cloth made with the cotton weave or cross twill for face, and cotton weave or four harness satin for back. It was originally made with fine Merino lamb's wool for face, and somewhat coarser grade for back. The cheaper grades are manufactured from a fine-fibered wool and shoddy, with low grades of shoddy and mungo for back. It is named from an English town, Kersey, where from the eleventh to the fifteenth century a large woolen trade was carried on. The Kersey of early history was a coarse cloth, known under different names, and before knitting was used for stockings. In the construction of Kersey the cloth is woven a few inches wider in the loom (and correspondingly longer) than it is to appear in the finished state. This is done in order that the meshes may be closed up in the fulling mill to insure a covering of threads. Previous to fulling, however, the face of the cloth is gigged to produce a good covering for the threads by forming a light nap, which is fitted in. In the fulling operation, which comes next, the cloth is shrunk to its proper width and density, usually to a degree rendering it difficult to see the individual warp and filling threads, so closely are they matted together. Fulling is followed by gigging, and in this process a nap more or less heavy is raised on the face of the goods by means of teasels. The cloth is run through the gig several times and then sheared in order to render the fibers forming the nap short, even, and of uniform length. Great care is exercised in the shearing, as the nap must be cropped quite close and yet not expose the threads or cut the face. The next operation is scouring or steaming, in which live steam is forced through every part of the goods for the purpose of developing the natural luster of the wool. In case the goods are to be piece dyed, the dyeing follows scouring. After steaming, the cloth is thoroughly matted and gigged again, care being taken to avoid stirring up the ground nap. It is then dried and the nap briskly brushed in a steam brusher and laid evenly in one direction. Again the cloth is slightly steamed and primed, face up. The result of this treatment is the production of a texture firm, yet pliable, with a highly lustrous face and one not liable to wear rough or threadbare. Kersey is used for overcoats.