The Pistola Mitragliatrice Fiat Mod. 1915, commonly nicknamed the Villar Perosa, was an Italian portable automatic weapon developed during World War I by the Officine di Villar Perosa.

As it was designed to use 9x19mm ammunition, it is said to be the first submachine gun, although not a true submachine gun by modern standards. Due to its extremely high rate of fire, it was nicknamed Pernacchia (literally raspberry, in that context meaning something like fart gun) by its operators.

Villar Perosa aircraft submachine gun

Design

The Villar Perosa was designed as a portable double-barrel machine gun firing a handgun round. It consisted of two independent coupled weapons, each with its own barrel, firing mechanism, and separate 25-round magazine.

Villar Perosa aircraft submachine gun

The Villar Perosa operated on a delayed-blowback action. On the forward part of each bolts is an extension housing a guided slot. These slots are engaged by a lug which cause the bolts to rotate 45° upon firing. The bolt's retraction is delayed by the inertia forced by the lug as the bolt rotates. Both bolts ride on a spring-loaded guide rod.

Villar Perosa aircraft submachine gun

All weapons of the Villar Perosa family, including the O.V.P. submachine gun and Revelli-Beretta carbine, were originally intended to fire a variant of the 9mm Glisenti cartridge, known as Glisenti M.915 "Per Mitragliatrici" ("For Machine-Guns"). This was a higher-velocity version of the standard Glisenti cartridge with an over-powder wad, designed to improve the penetration abilities of the weak base cartridge.

The original patent was filed in April 1914 by Abiel Bethel Revelli, a Piedmontese officer who was active in designing most of the Italian Army's automatic weapons in the early 20th century.

A common myth is that this weapon was originally designed as an aircraft gun, and adapted for infantry. In reality ground use was taken into consideration from the very beginning, particularly for the Bersaglieri's cyclist battalions. At the time the Italian Army was experimenting with adapting machineguns to be carried or fired from a bicycle, including a special folding bicycle that carried a Fiat-Revelli machine-gun underneath the seat.

Before World War I, the Bersaglieri were supplied by a small factory near Pinerolo, known as Officine di Villar Perosa (O.V.P.). This company was a subsidiary of FIAT operated by Roberto Incerti. O.V.P. was primarily contracted to manufacture bicycles, but later the Bersaglieri commissioned them to produce automatic weapons designed by Abiel Revelli. They placed an order for 6,000 Genovesi-Revelli automatic rifles in 1910, but only 150 were built since the weapon underperformed and was cancelled. The Villar Perosa submachine gun was developed by Revelli in the following years, and it would seem to have offered a solution to the Bersaglieri's problem, photographs show a Villar Perosa experimentally mounted to the handlebars of a bicycle.

Operational history

In early 1915, O.V.P. produced a trial batch of Villar Perosas and submitted them to the Army for testing. The weapon was accepted into service and an immediate order was placed. When Italy entered World War I that year, the Army suffered a shortage of machine guns (At the time only obsolete 1886 Gardner guns, 150 Perino machine guns, and a few Maxim guns were in service). The Fiat-Revelli and the Villar Perosa were the only domestically-produced machine guns, and the demand ramped up significantly. Production in the first year fell short, with only about 200 - 400 Fiat-Revellis being turned out, and about 350 Villar Perosas. The Italian Air Force (then a wing of the Army) had virtually no machine-guns and a few hundred of the first Villar Perosas were issued to them - giving rise to the myth that it was designed as an aircraft gun.

The weapon was originally issued with a gun shield.

The Villar Perosa was first issued to the infantry in 1916, with mixed results.

The Austro-Hungarians first encountered the weapon at the Battle of Asiago in May 1916. Although only a few hundred Villar Perosas were in frontline service initially, the number swelled up to about over 2,000 by the end of 1916 and it became increasingly common for Austro-Hungarian troops to come under attack from Italian troops wielding this new weapon.

The weapon was light and easy to transport in the terrain of the Alpine Front, but troops were initially not given training with it and officers had no idea how best to field it. The weapon was used almost exclusively as a defensive machine-gun on trench lines and observation points for most of 1916. In this role it would have almost certainly been inadequate, as it lacked the range, accuracy, capacity and firepower of a proper machine gun.