1. Beam on which the warp is wound. 2. Warp. 3. Creel. 4. Spools in the creel.]
The comber now takes the lap and combs out all the impurities and short fibers, at a sacrifice of about one-fifth of the material; next, it combines six of these fluffy combed rolls of fiber into one. A number of these rolls are then drawn out by another machine twelve times as long as they were before and twisted together on a slubbing frame. This last drawing reduces the roll to about the thickness of zephyr yarn. After being further doubled and twisted, the yarn, or roll, is ready for the mule spinner, which accomplishes by means of hundreds of spindles and wheels what the housewife once did with her spinning wheel. The mule, however, does the work of more than 1,000 hand spinners and takes up much less space. On this machine 900 spindles take the yarn from 1,800 bobbins, and by means of accelerating rollers and a carriage draw out and twist it to the proper fineness for the size of thread wanted. Having passed through the complex processes of cleansing, combing, drawing, and spinning, the cotton is now in the form of yarn of various sizes, and the real work of thread making, which is a distinct art from yarn making, begins.
The thread-making process is briefly as follows: The yarn is doubled and twisted; then three of such yarns are twisted together, which give the six-fold combination for six-cord thread. For a three-cord thread three yarns are twisted together. After the twisting is completed the thread is reeled into skeins having a continuous length of 4,000 to 12,000 yards, according to the size, and is then sent to the examining department where it is rigidly inspected. Every strand is looked over, and any found to be defective are laid aside, so that when the thread is put on the market it shall be as perfect as care and skill can make it.
At this stage of the work the skeins of thread are of the pale cream color common to all unbleached cotton goods, and are technically known as "in the gray." They therefore have to be bleached pure white or dyed in fast colors. The skeins, whether intended for white or colored thread, are first placed in large, steam-tight iron tanks and boiled. Here the thread remains subjected to a furious boiling for six or seven hours; when removed it is perfectly clean, but still retains the brownish gray color of unbleached cotton. It then goes into a bath of chloride of lime and is bleached as white as snow. The skeins are next drawn through an acid solution to neutralize the chloride. Another boiling, another bleaching, a bath of soapsuds, and the final rinsing, complete the cleansing and whitening process. Those skeins intended for colored threads are taken to the dyeing room and placed in tanks filled with suitably prepared dyeing solutions.