Only a few years had passed, and self-acting tools were now enabled to complete, with precision and uniformity, machines that before had been deemed almost impracticable. In proportion to the rapid extension of railways the demand for locomotives became very great. As our machine tools were peculiarly adapted for turning out a large amount of first-class work, we directed our attention to this class of business. In the course of about ten years after the opening of the Liverpool and Manchester Railway, we executed considerable orders for locomotives for the London and Southampton, the Manchester and Leeds, and the Gloucester Railway Companies.

The Great Western Railway Company invited us to tender for twenty of their very ponderous engines. They proposed a very tempting condition of the contract. It was that if, after a month's trial of the locomotives, their working proved satisfactory, a premium of £100 was to be added to the price of each engine and tender. The locomotives were made and delivered; they ran the stipulated number of test miles between London and Bristol in a perfectly satisfactory manner; and we not only received the premium, but, what was much more encouraging, we received a special letter from the board of directors, stating their entire satisfaction with the performance of our engines, and desiring us to refer other contractors to them with respect to the excellence of our workmanship. This testimonial was altogether spontaneous, and proved extremely valuable in other quarters.

Stories of Invention — Part 150

The date of the first sketch of my steam-hammer was Nov. 24, 1839. It consisted of, first, a massive anvil, on which to rest the work; second, a block of iron constituting the hammer, or blow-giving portion; and, third, an inverted steam cylinder, to whose piston-rod the hammer-block was attached. All that was then required to produce a most effective hammer, was simply to admit steam of sufficient pressure into the cylinder, so as to act on the under side of the piston, and thus to raise the hammer-block attached to the end of the piston-rod. By a very simple arrangement of a slide-valve under the control of an attendant, the steam was allowed to escape, and thus permit the massive block of iron rapidly to descend by its own gravity upon the work then upon the anvil.

Stories of Invention — Part 150