C-RAN-Cedar Herald Index

C-RAN (Cloud-RAN), also referred to as Centralized-RAN, is an architecture for cellular networks. C-RAN is a centralized, cloud computing-based architecture for radio access networks that supports 2G, 3G, 4G and future wireless communication standards. Its name comes from the four 'C's in the main characteristics of C-RAN system, "Clean, Centralized processing, Collaborative radio, and a real-time Cloud Radio Access Network".

Background

Traditional cellular, or Radio Access Networks (RAN), consist of many stand-alone base stations (BTS). Each BTS covers a small area, whereas a group BTS provides coverage over a continuous area. Each BTS processes and transmits its own signal to and from the mobile terminal, and forwards the data payload to and from the mobile terminal and out to the core network via the backhaul. Each BTS has its own cooling, back haul transportation, backup battery, monitoring system, and so on. Because of limited spectral resources, network operators 'reuse' the frequency among different base stations, which can cause interference between neighboring cells.

C-RAN

There are several limitations in the traditional cellular architecture. First, each BTS is costly to build and operate. Moore's law helps reduce the size and power of an electrical system, but the supporting facilities of the BTS are not improved quite as well. Second, when more BTS are added to a system to improve its capacity, interference among BTS is more severe as BTS are closer to each other and more of them are using the same frequency. Third, because users are mobile, the traffic of each BTS fluctuates (called 'tide effect'), and as a result, the average utilization rate of individual BTS is pretty low. However, these processing resources cannot be shared with other BTS. Therefore, all BTS are designed to handle the maximum traffic, not average traffic, resulting in a waste of processing resources and power at idle times.

C-RAN

Evolution of base station architecture

All-in-one macro base station

In the 1G and 2G cellular networks, base stations had an all-in-one architecture. Analog, digital, and power functions were housed in a single cabinet as large as a refrigerator. Usually the base station cabinet was placed in a dedicated room along with all necessary supporting facilitates such as power, backup battery, air conditioning, environment surveillance, and backhaul transmission equipment. The RF signal is generated by the base station RF unit and propagates through pairs of RF cables up to the antennas on the top of a base station tower or other mounting points. This all-in-one architecture was mostly found in macro cell deployments.

C-RAN

Distributed base station

For 3G, a distributed base station architecture was introduced by Ericsson, Nokia, Huawei, and other leading telecom equipment vendors. In this architecture the radio function unit, also known as the remote radio head (RRH), is separated from the digital function unit, or baseband unit (BBU) by fiber. Digital baseband signals are carried over fiber, using the Open Base Station Architecture Initiative (OBSAI) or Common Public Radio Interface (CPRI) standard. The RRH can be installed on the top of tower close to the antenna, reducing the loss compared to the traditional base station where the RF signal has to travel through a long cable from the base station cabinet to the antenna at the top of the tower. The fiber link between RRH and BBU also allows more flexibility in network planning and deployment as they can be placed a few hundred meters or a few kilometers away. Most modern base stations now use this decoupled architecture.

C-RAN/Cloud-RAN

C-RAN may be viewed as an architectural evolution of the above distributed base station system. It takes advantage of many technological advances in wireless, optical and IT communications systems. For example, it uses the latest CPRI standard, low cost Coarse or Dense Wavelength Division Multiplexing (CWDM/ DWDM) technology, and mmWave to allow transmission of baseband signal over long distance thus achieving large scale centralised base station deployment. It applies recent Data Centre Network technology to allow a low cost, high reliability, low latency and high bandwidth interconnect network in the BBU pool. It utilizes open platforms and real-time virtualization technology rooted in cloud computing to achieve dynamic shared resource allocation and support multi-vendor, multi-technology environments.