Class B and Class E, normally referred to as Gullfisk (Norwegian for "goldfish"), were a class of 46 trams built by Strømmens Værksted and Skabo Jernbanevognfabrikk for Oslo Sporveier and Bærumsbanen of Oslo, Norway, in 1937 and 1939. They were the first aluminium trams to operate on the Oslo Tramway and the first bogie trams to operate on street lines. They had contemporary modern electronic equipment, a streamlined shape, and comfortable accommodation. Until 1964, they were also faster than any other Norwegian tramcar or suburban railcar.
Six prototype trams were delivered by Strømmen in 1937, with four different motor solutions, from AEG, Siemens, Vickers and Norsk Elektrisk & Brown Boveri (NEBB). None of these were particularly successful, and the 40 serial production trams used conventional motors from ELIN. These were delivered in 1939, with 20 (class E) being used by Oslo Sporveier mainly on the Kjelsås Line, but also on other services. The remaining 20 trams (class B) were leased to Bærumsbanen, that used them on the Kolsås and Østensjø Lines, and later on the Ekeberg Line.
From 1967, Oslo Sporveier transferred all its trams to Bærumsbanen, where they remained in use until 1985. The class has been involved in several fatal incidents, including the Strømsveien tram fire in 1958. Six trams (prototype no 163, nos 166, 170, 196 and 199) remain at the Oslo Tramway Museum; whilst Oslo Sporveier has kept two and converted them to maintenance vehicles (nos 185 and 198), painted them yellow with zebra stripes. They also kept one themselves as a veteran tram (no 183).
Background
During the 1930s, Oslo Sporveier operated a fleet of 150 trams and 130 trailers. The latest series, the HaWa Class, had been delivered during the early 1920s and were, by the late 1930s, becoming old fashioned, with low speed, uncomfortable interiors and a two-axle wheel arrangement. Increased competition from cars and buses made the tram company start a process to find a new "generation" of trams and buses. In 1935, an agreement was made with Stømmmens Værksted to build a series of aluminium-bogied trams and buses. Since the last order, the tracks had been relaid farther from one another, so the tramway could operate wide and long trams.
The use of an aluminium body was controversial, and international experts recommended that the tram company should not choose that solution. The goal was to decrease the weight so the trams could operate with less-powerful motors, giving a lower cost. The first prototype was a full-scale model of a tram, built at Homansbyen Depot in 1935, using an undercarriage from disused horsecars.
Construction
Strømmens Værksted delivered six prototypes for Oslo Sporveier in 1937, all with slightly different specifications. They were numbered 158–163. The four main types of prototypes were later designated B2 (158–159 with motors from Vickers), E4 (160 with motors from Siemens), E3 (161–162 with motors from AEG) and E2 (163 with motors from NEBB). The trams were taken into use in February 1937 on the Kjelsås Line. They were capable of , compared to the maximum possible by the older trams. According to tests by JG Brill Company, which was a specialist on high-speed interurban railcars, streamline construction would afford a power reduction of 17% at as low speed as .
Shortly after being taken into use, No. 158 lost braking power, killing one person when it landed on the pavement. The initial plan was to use the six trams to operate all services on the Kjelsås Line, with one vehicle in reserve, but this was not possible because of more out-of-service vehicles than estimated.