We can make the receipts nothing either by making the charges so large that nothing can bear them, or so small as to vanish. Even when the receipts are 0, we still have the expense of moving the empties.
By forming a table in which one column shall show the different charges, and the second the corresponding amounts transferred, with the consequent receipts and cost of working, we shall find which rate of charge will give the greatest difference between expense and receipt.
413. Express trains are a source of vast expense, directly and indirectly, which can never be repaid by any practicable tariff to be levied upon them. Dr. Lardner, (1850):—
Resolved, That this meeting recommend the adoption of a higher rate of fare upon express passenger trains, corresponding in some degree to the increased cost of such trains.—American Railroad Convention of 1854.
This is due to the extra wear and tear of engines, cars, and road, from increased speed, and also to the delays occasioned to other trains in motion at the same time.
The influence of express trains is felt not only by themselves, but by nearly all the trains upon the road.
NOTE.—To determine the most economical speed, regard need only be had to the variable elements of cost, namely: cost of power, and maintenance of superstructure, and rolling stock; assuming the power expended as the resistance, and the cost of repairs of machinery and superstructure as the velocity, we form the following table:—
Velocity in Resistance Hours con. Product of Cost of miles per in pounds in going column 2 × repairs. Result. hour. per ton. 300 miles. 3. 10 8.6 30 258 100 358 15 9.3 20 186 150 336 20 10.3 15 154 200 354 25 11.6 12 139 250 389 30 13.3 10 133 300 433 35 15.2 8.60 131 350 481 40 17.3 7.50 130 400 530 45 19.8 6.67 132 50 22.6 6 136 60 29.1 5 145 100 66.5 3 200
The result is found by adding the product of columns 2 and 3, or column 4 to column 5, from which the minimum cost is seen to be produced by a very little more than fifteen miles per hour. The variable (and above assumed) element is the rate of increase of cost of maintenance.
All trains in motion at the same time within a certain distance of the express, must be kept waiting with steam up, or be driven with extra velocities in order to keep out of the way.