Wilson (fig. 89) Wilson (W.G.) Sewing ca.1867 after 1885 (_see_ Buckeye) Machine Co., Cleveland, Ohio
Windsor (one thread) Vermont Arms Co., 1856 1858 Windsor, Vt.
Windsor Lamson, Goodnow & Yale, 1859 1861 (_see_ Clark's Windsor, Vt. Revolving Looper)
" Charles W. Howland, ca. 1860 -- Wilmington, Del.
" Miles Greenwood & Co., ca. 1861 -- Cincinnati, Ohio
" Wilson H. Smith, ca. 1860 -- Birmingham, Conn.
[Illustration: Figure 68.--AMERICAN BUTTONHOLE, Overseaming & Sewing Machine of about 1870. Using serial numbers, these machines can be dated approximately as follows: 1-7792, 1869; 7793-22366, 1870; 22367-42488, 1871; 42489-61419, 1872; 61420-75602, 1873; 75603-89132, 1874; 89133-103539, 1875; and 103540-121477, 1876. Figures are not available for the years from 1877 to 1886. (Smithsonian photo 46953-E.)]
[Illustration: Figure 69.--(NEW) AMERICAN SEWING MACHINE of about 1874. Illustration is from a contemporary advertising brochure. (Smithsonian photo 33507.)]
[Illustration: Figure 70.--AMERICAN MAGNETIC SEWING MACHINE, 1854. Machines of this type were manufactured for only two years under the patent of Thomas C. Thompson, March 29, 1853, and later under the patents of Samuel J. Parker, April 11, 1854, and Simon Coon, May 9, 1854. On September 30, 1853, Elias Howe listed receipts of $1000 from the American Magnetic Sewing Machine Co. for patent infringement. The machines manufactured after that date carry the Howe name and 1846 patent date to show proper licensing. Judging by Howe's usual license fee of $25 per machine, about 40 machines were manufactured prior to September 1853. The company was reported to have made about 600 machines in 1854 before it went out of business. The only American Magnetic machine known to be in existence is in the collection of the Northern Indiana Historical Society at South Bend, Indiana. (_Photo courtesy of the Northern Indiana Historical Society._)]
[Illustration: Figure 71.--ATLANTIC SEWING MACHINE, 1869. This machine is typical of the many varieties manufactured for a very short time in the 1860s and 1870s. It is about the size of the average hand-turned variety, 8 by 10 inches, but lighter in weight. The frame design was the patent of L. Porter, May 11, 1869, and the mechanism was patented by Alonzo Porter, February 8, 1870. The latter patent model bears the painted legend "Atlantic" and is stamped "Aprl 1, 69," indicating that it was probably already in commercial production. This date possibly may refer also to L. Porter's design patent, since actual date of issue was usually later than date of application. (Smithsonian photo 48329-A.)]