There were four spades and an iron shovel at Marlborough in 1771. An iron reinforcement from a shovel handle occurred in the site (USNM 59.1847, ill. 84), while a slightly less curved strip of iron may have been attached to a spade handle (USNM 59.1662). Once more in Chapman's account we find evidence of local workmanship in an item for "1 Spade."

[Illustration: Illustration 86.--Animal trap. One-third. (USNM 59.1715.)]

The Cultural History of Marlborough, Virginia — Part 161

Thirteen scythes were listed in 1771; perhaps the one excavated from the foundation of Structure H on Potomac Creek may have been among these (USNM 59.2400, fig. 90). There were eight sheep shears; half of a sheep shears was found in Structure G (USNM 59.1734, ill. 85). Of the other items on the list, a few, such as stock locks and hammers, have already been mentioned, while the remainder of the list is not matched by artifacts. An item for a chalk-line is supported by a piece of chalk (USNM 59.1683, fig. 84).

The Cultural History of Marlborough, Virginia — Part 161

[Illustration: Illustration 87.--Iron bridle bit (see fig. 91c). Same size.]

The Cultural History of Marlborough, Virginia — Part 161

[Illustration: Illustration 88.--Fishhook. One-half. (USNM 59.1681.)]

[Illustration: Illustration 89.--Brass strap handle (see fig. 83j). Same size. (USNM 59.1736.)]

A few specimens are not matched in the inventory. One is a springtrap of hand-forged, hand-riveted iron (USNM 59.1715, ill. 86) for catching animals. Another is a fishhook (USNM 59.1681, ill. 88), possibly one of 95 bought in 1744. An iron stiffener for the framework of a saddle is fitted with 10 rivets for securing the leather and upholstery (USNM 59.1847, fig. 91d). The third artifact is an elegantly designed brass fitting for a leather curtain or strap (USNM 59.1736, fig. 83j, ill. 89). It is fitted with a copper rivet at the stationary end for securing leather or cloth; just below the rivet is a recessed groove and shelf, perhaps to receive a reinforced edge; to the lower part of this is hinged a long handle cut in a leaf design. An iron hinge bar is part of the equipment for folding back the top of a chaise (USNM 60.178, fig. 91a). There are several horseshoes, two whole shoes and numerous fragments (fig. 91i and j). Finally, the handle shaft and decorative attachment of an iron currycomb (USNM 59.2077, fig. 91f) recalls Mercer's purchase of "1 curry comb and brush" in 1726.