=Carrying Capacity.= In a current-conductor, its carrying capacity up to the heating-point. It is expressed in amperes.

=Cascade.= The arrangement of a series of Leyden-jars in properly insulated stools, or supports, for accumulating frictional electricity. They are arranged in a manner somewhat similar to a battery of galvanic cells, the inner coating of one being connected to the outer coating of the next, and so on through the series.

Harper's Electricity Book for Boys — Part 187

=Case-hardening, Electric.= A process by which the surface of iron is converted into steel by applying a proper carbonaceous material to it while it is being heated by an electric current.

Harper's Electricity Book for Boys — Part 187

=Cautery, Electric.= An electro-surgical appliance for removing diseased parts or arresting hemorrhages. It takes the place of the knife or other cutting instrument. It is a loop of platinum wire heated to whiteness by an electric current.

Harper's Electricity Book for Boys — Part 187

=C.C.= An abbreviation commonly used for cubic-centimeter. It is usually written in small letters, as 50 c.c., meaning 50 cubic-centimeters.

=Cell, Electrolytic.= A vessel containing the electrolyte used for electro-plating.

=Cell, Regenerated.= A cell restored to its proper functions by a process of recharging.

=Cell, Standard.= Meaning the same as battery. The vessel, including its contents, in which electricity is generated.

=Cell, Storage.= Two plates of metal, or compounds of metal, whose chemical relations are changed by the passage of an electric current from one plate to the other through an electrolyte in which they are immersed.

=Cements, Electrical.= Cements of a non-conducting nature, such as marine glue and sticky compounds, used in electrical work.

=Centrifugal Force.= A diametric revolving force which throws a body away from its axis of rotation. A merry-go-round is a simple example of this force. The more rapidly the platform revolves the greater the tendency for those on it to be thrown off and out from the centre. The high velocity attained by the armatures in motors and dynamos would throw the wires out of place and cause them to rub against the surfaces of the field-magnets. Consequently, wire bands or binders are necessary to keep the coils of wire from spreading under the influence of the centrifugal force.