The Triumph Vitesse is a compact six-cylinder car built by Standard-Triumph from 1962-1971. The car was styled by Giovanni Michelotti, and was available in saloon and convertible variants.
The Vitesse name was first used by Austin in their 1914–16 Austin 20 (hp) and 30 (hp) Vitesse models. This was followed in 1922 by G. N.(Godfrey & Nash) on their GN Vitesse Cycle-car, and then by Triumph on a car made from 1935-1938.
After the last Triumph Vitesse was made in 1971, the Vitesse name remained unused until 1982. In 1982, Rover began to use the name on their SD1 until 1986. They also used it from 1984-1990 on the SD3 216, and on the Rover 800 from October 1988 - 1991, at which time it was rebodied as the R17 version. The R17 was produced until 1998 as the Rover Vitesse Sport.
Vitesse 6
The Triumph Vitesse was introduced on May 25, 1962 and reused a name previously used by the pre-Second World War Triumph Motor Company from 1936–38. The engine was an inline 6-cylinder performance version of the Triumph Herald small saloon. The Herald had been introduced in 1959 and was a 2-door car styled by the Italian designer Giovanni Michelotti. Within two years, Triumph began to give thought to a sports saloon based on the Herald and using their 6-cylinder engine. Michelotti was again approached for styling, and he came up with a car that used almost all body panels from the Herald, combined with a new front end with a slanted 4-headlamp design.
Standard-Triumph fitted a 1596 cc version of their traditional straight-6 derived from the engine used in the Standard Vanguard Six, but with a smaller bore diameter of , compared with the bore on the Vanguard, equipped with twin Solex B32PIH semi-downdraught carburetors. These were soon replaced by B321H carburetors due to issues with accelerator pumps. A "seam" on the cylinder block between the third & fourth cylinders reveals the design beginnings of the 803cc Standard SC engine block, first used in the Standard Eight of 1953. The gearbox was strengthened and upgraded to closer (more sporting) gear ratios, and also offered with optional Laycock De Normanville 'D-type' overdrive with a 20% higher ratio for the top gear (the equivalent change from 3rd to 4th in a standard transmission), giving for more relaxed and economical cruising. Models fitted with overdrive had a chrome badge with "Overdrive" in italic text on the left side of the boot opposite the Vitesse 6 chrome script badge on the right. Synchromesh was present on 2nd, 3rd and 4th gears.
The rear axle was changed to a slightly uprated differential, but retaining the same 4.11:1 ratio and flange sizes as the Herald. Front disc brakes were standard as were larger rear brake drums, and the Herald fuel tank was enlarged, retaining the reserve feature (essentially a curved pickup pipe that could be rotated to dip into the last few centimeters of fuel) of the smaller Herald tank. The front suspension featured uprated springs to cope with the extra weight of the new engine, while the rear suspension, a swing-axle transverse-leaf system, was mostly unchanged from the Herald. The chassis looked outwardly similar to the early Heralds, but in fact was substantially re-designed and strengthened, especially around the differential mountings, improvements which were immediately passed through to Herald production. The dash and instrument panel of the earliest Vitesse was the same as the Herald, with a single speedometer dial featuring fuel and temperature gauge insets. The Vitesse was available in convertibles and saloon forms; a coupé never got beyond the prototype stage. The separate chassis construction of the car meant that no additional strengthening to chassis or body was considered necessary for the convertible model, the only concession being additional door catches to prevent the doors opening during hard cornering.
A handful of Vitesse estates also were assembled to special order at Standard-Triumph's Service Depot at Park Royal in West London.
The Vitesse received a more luxurious interior compared to the Herald; wooden door capping were added to match the wooden dashboard and the car featured slightly better seats and door trims. Optional extras included a vinyl/fabric 'Britax Weathershield' sunroof on saloon models. Exterior trim was also improved with an elongated stainless steel trim piece which extended further down the body than the Herald, including a Vitesse specific piece of trim rearward of the petrol filler cap and satin-silver anodized alloy bumper capping replacing the white rubber Herald items.