The bromides closely resemble the chlorides and fluorides.

Cuprous iodide, Cu2I2, is obtained as a white powder, which suffers little alteration on exposure, by the direct union of its components or by mixing solutions of cuprous chloride in hydrochloric acid and potassium iodide; or, with liberation of iodine, by adding potassium iodide to a cupric salt. It absorbs ammonia, forming the compound Cu2I2, 4NH3. Cupric iodide is only known in combination, as in CuI2, 4NH3, H2O, which is obtained by exposing Cu2I2, 4NH3 to moist air.

Encyclopaedia Britannica, 11th Edition, Volume 7, Slice 3 — Part 172

Cuprous sulphide, Cu2S, occurs in nature as the mineral chalcocite or copper-glance (q.v.), and may be obtained as a black brittle mass by the direct combination of its constituents. (See above, METALLURGY.) Cupric sulphide, CuS, occurs in nature as the mineral covellite. It may be prepared by heating cuprous sulphide with sulphur, or triturating cuprous sulphide with cold strong nitric acid, or as a dark brown precipitate by treating a copper solution with sulphuretted hydrogen. Several polysulphides, e.g. Cu2S5, Cu2S6, Cu4S6, Cu2S3, have been described; they are all unstable, decomposing into cupric sulphide and sulphur. Cuprous sulphite, CuSO3·H2O, is obtained as a brownish-red crystalline powder by treating cuprous hydrate with sulphurous acid. A cuproso-cupric sulphite, Cu2SO3, CuSO3,2H2O, is obtained by mixing solutions of cupric sulphate and acid sodium sulphite.

Encyclopaedia Britannica, 11th Edition, Volume 7, Slice 3 — Part 172

Cupric sulphate or "Blue Vitriol," CuSO4, is one of the most important salts of copper. It occurs in cupriferous mine waters and as the minerals chalcanthite or cyanosite, CuSO4·5H2O, and boothite, CuSO4·7H2O. Cupric sulphate is obtained commercially by the oxidation of sulphuretted copper ores (see above, METALLURGY; wet methods), or by dissolving cupric oxide in sulphuric acid. It was obtained in 1644 by Van Helmont, who heated copper with sulphur and moistened the residue, and in 1648 by Glauber, who dissolved copper in strong sulphuric acid. (For the mechanism of this reaction see C. H. Sluiter, _Chem. Weekblad_, 1906, 3, p. 63, and C. M. van Deventer, ibid., 1906, 3, p. 515.) It crystallizes with five molecules of water as large blue triclinic prisms. When heated to 100°, it loses four molecules of water and forms the bluish-white monohydrate, which, on further heating to 25O°-260°, is converted into the white CuSO4. The anhydrous salt is very hygroscopic, and hence finds application as a desiccating agent. It also absorbs gaseous hydrochloric acid. Copper sulphate is readily soluble in water, but insoluble in alcohol; it dissolves in hydrochloric acid with a considerable fall in temperature, cupric chloride being formed. The copper is readily replaced by iron, a knife-blade placed in an aqueous solution being covered immediately with a bright red deposit of copper. At one time this was regarded as a transmutation of iron into copper. Several basic salts are known, some of which occur as minerals; of these, we may mention brochantite (q.v.), CuSO4, 3Cu(OH2), langite, CuSO4, 3Cu(OH)2, H2O, lyellite (or devilline), warringtonite; woodwardite and enysite are hydrated copper-aluminium sulphates, connellite is a basic copper chlorosulphate, and spangolite is a basic copper aluminium chlorosulphate. Copper sulphate finds application in calico printing and in the preparation of the pigment Scheele's green.

Encyclopaedia Britannica, 11th Edition, Volume 7, Slice 3 — Part 172