Integrated circuits are put into protective packages to allow easy handling and assembly onto printed circuit boards and to protect the devices from damage. A very large number of different types of package exist. Some package types have standardized dimensions and tolerances, and are registered with trade industry associations such as JEDEC and Pro Electron. Other types are proprietary designations that may be made by only one or two manufacturers. Integrated circuit packaging is the last assembly process before testing and shipping devices to customers.
Occasionally specially-processed integrated circuit dies are prepared for direct connections to a substrate without an intermediate header or carrier. In flip chip systems the IC is connected by solder bumps to a substrate. In beam-lead technology, the metallized pads that would be used for wire bonding connections in a conventional chip are thickened and extended to allow external connections to the circuit. Assemblies using "bare" chips have additional packaging or filling with epoxy to protect the devices from moisture.
Through-hole packages
Through-hole technology uses holes drilled through the printed circuit board (PCB) for mounting the components. The component has leads that are soldered to pads on the PCB to electrically and mechanically connect them to the PCB.
Surface mount
Chip on board is a packaging technique that directly connects a die to a PCB, without an interposer or lead frame.
Chip carrier
A chip carrier is a rectangular package with contacts on all four edges. Leaded chip carriers have metal leads wrapped around the edge of the package, in the shape of a letter J. Leadless chip carriers have metal pads on the edges. Chip carrier packages may be made of ceramic or plastic and are usually secured to a printed circuit board by soldering, though sockets can be used for testing.
Pin grid arrays
Flat packages
Small outline packages
A small outline integrated circuit (SOIC) is a surface-mounted integrated circuit (IC) package which occupies an area about 30–50% less than an equivalent dual in-line package (DIP), with a typical thickness being 70% less. They are generally available in the same pin-outs as their counterpart DIP ICs.
Chip-scale packages
According to IPC's standard J-STD-012, Implementation of Flip Chip and Chip Scale Technology, in order to qualify as chip scale, the package must have an area no greater than 1.2 times that of the die and it must be a single-die, direct surface mountable package. Another criterion that is often applied to qualify these packages as CSPs is their ball pitch should be no more than 1 mm. Chip-scale package
Ball grid array
Ball grid array (BGA) uses the underside of the package to place pads with balls of solder in grid pattern as connections to PCB.
Transistor, diode, small-pin-count IC packages
MELF: Metal electrode leadless face (usually for resistors and diodes) SOD: Small-outline diode. SOT: Small-outline transistor (also SOT-23, SOT-223, SOT-323). TO-XX: wide range of small pin count packages often used for discrete parts like transistors or diodes. TO-3: Panel-mount with leads TO-5: Metal can package with radial leads TO-18: Metal can package with radial leads TO-39 TO-46 TO-66: Similar shape to the TO-3 but smaller TO-92: Plastic-encapsulated package with three leads TO-99: Metal can package with eight radial leads TO-100 TO-126: Plastic-encapsulated package with three leads and a hole for mounting on a heat sink TO-220: Through-hole plastic package with a (usually) metal heat sink tab and three leads TO-226 TO-247: Plastic-encapsulated package with three leads and a hole for mounting on a heat sink TO-251: Also called IPAK: SMT package similar to the DPAK but with longer leads for SMT or TH mounting TO-252: (also called SOT428, DPAK): SMT package similar to the DPAK but smaller TO-262: Also called I2PAK: SMT package similar to the D2PAK but with longer leads for SMT or TH mounting TO-263: Also called D2PAK: SMT package similar to the TO-220 without the extended tab and mounting hole TO-274: Also called Super-247: SMT package similar to the TO-247 without the mounting hole