Detached towers are not uncommon features of our parish churches in some parts of England, particularly in Herefordshire and Norfolk. The best examples are at Berkeley, Gloucestershire; Ledbury, Herefordshire; West Walton, Norfolk; and Beccles, Suffolk. Some churches, again, can only boast wooden detached belfries of moderate height to hold their bells, as at Pembridge in Herefordshire, Brooklands in Kent, and East Bergholt in Suffolk (Plate 26). The belfry at the last-named place is no more than a mere shed, and more than one story is told in explanation of the absence of a tower to the otherwise imposing church.
THE 9TH BELL OF LOUGHBOROUGH PARISH CHURCH.
Cast by the Taylors of that town. (See page 41.)]
One of the chief uses made of church bells in modern times is not strictly a religious use, though it is more or less associated with the Church’s seasons, particularly with Sundays and Christmas Day. But it has always been recognized that the secular use of bells, within certain limits, is permissible, as will be further seen in the next chapter.
Change-ringing is, as we have already noted, an entirely modern introduction, and is, moreover, confined to England. In pre-Reformation days we hear of guilds of ringers, as, for instance, at Westminster Abbey, in the reign of Henry III, where the brethren of the guild appear to have enjoyed their privileges since the time of Edward the Confessor. In smaller monastic or collegiate establishments clerics in minor orders were often entrusted with the duty of ringing the bells, as at Tong, in Shropshire (cf. Plate 30). But this kind of ringing was in no way scientific, nor were the fittings of the bells adapted for ringing in the strict modern sense.
The accompanying diagram (Plate 27; compare also Plate 28), showing the way in which a modern bell is hung, will serve to explain the method now adopted for ringing proper, as opposed to chiming. The headstock, or wooden block to which the top of the bell is firmly fixed (so that the bell cannot move independently of it), revolves by means of brass pivots, known as the “gudgeons,” in a socket made in the top of the framework. One of these pivots forms the axle of a large wooden wheel, half the circumference of which has a groove for the rope, one end of which is fixed in it, the other passing through a pulley down into the ringing-chamber. In mediaeval times half-wheels only were used, but the complete wheel seems to have been introduced by the fifteenth century, and single bells were “rung” in the sixteenth. Peal-ringing, as we know it, cannot be traced before the seventeenth.