=EXPERIMENT 155. To test the attracting and "sucking" power of a magnetized coil or helix.=

_Apparatus._ The coil, battery, etc., used in Exp. 154, Fig. 122; a sewing-needle.

The Study of Elementary Electricity and Magnetism by Experiment — Part 113

=393. Directions.= (A) Arrange the coil, etc., as described in Exp. 154. The coil need not lie in the E and W line, however, and a key may be used instead of the current reverser.

The Study of Elementary Electricity and Magnetism by Experiment — Part 113

(B) Magnetize the needle so that its point will be a N pole.

The Study of Elementary Electricity and Magnetism by Experiment — Part 113

(C) Tie a thread about the center of the magnetized needle, hold the thread in the hand so that the S pole of the needle will swing freely at the hole at the right-hand end of the coil (Fig. 124). If the current passes as directed, the right-hand end of the coil will be a N pole. What happens to the needle when the key is pressed for an instant.

(D) Change the needle to the left end of the coil and repeat.

(E) Try a nail, pen, iron, etc., instead of the needle.

=EXPERIMENT 156. To find whether a piece of steel can be permanently magnetized by an electric current.=

_Apparatus._ Same as for last experiment; an unmagnetized sewing-needle; the compass.

=394. Directions.= (A) Be sure that the needle is not magnetized. It should attract both ends of the compass-needle. How can any magnetism in the needle be removed?

(B) Place the needle inside of the coil with its _point_ to the east; that is, with its point at the N pole of the coil, and its head at the S pole. Close the circuit for an instant. Test the needle again for poles. Is the point a N or a S pole?

(C) Turn the needle end for end in the coil, and see whether its polarity can be reversed.

(D) Experiment with iron wire, nails, steel pens, spring steel, etc.

=EXPERIMENT 157. To study the effect of a piece of iron placed inside of a magnetized coil of wire.=

_Apparatus._ Same as in Exp. 154; a short rod or iron _core_, I C, of soft iron (No. 92) that will fit inside of the coil. This combination is called an electromagnet.

=395. Directions.= (A) Arrange first as for Exp. 154, Fig. 122, with the coil in the E and W line, no core being used, and place O C about 6 in. from the right-hand end of the coil.

(B) Press the lever for an instant to see whether the field of the coil is strong enough to move the compass-needle at that distance. Move O C a little nearer or farther from the coil until the needle _just_ moves, when the circuit is closed.