The expansion and improvement of the art of reinforcing concrete began several decades ago. There were two different needs, one was for strengthening concrete beams, and the other for strengthening concrete columns. The term 'reinforcing bar' is usually applied in the art to a rod or bar used to reinforce a concrete beam against the tension longitudinal of the beam itself. The concrete itself has great power of resisting compression, but it has not tensile strength, and its weakness manifests itself in cracking along the lower half of the beam. A steel bar placed below the middle of the beam furnishes the useful tensile resistance. But it was found that certain diagonal cracks developed in the beam toward the respective ends of the beam, and it was sought to prevent these by minor auxiliary rods attached to the main reinforcing bar. This was the field which Vandenburgh entered and devised an arrangement, shown in Figure 1 of his drawings, of a reinforcing bar imbedded in the lower part of the beam with transverse loops or spirals, part on one side of the center of the bar and part on the other and fitted rigidly into the bar so that those on each side leaned at an angle away from the center and in an opposite inclination from those on the other. In strong construction, these spiral loops were doubled by a second spiral which meshed with the first. Now, as the specifications show, this arrangement of the bar and opposing spirals was to apply the truss principle to the strengthening of the beam, and to give it the tensional resistance along the lower part of the beam and against the diagonal tensions near the ends of the beam. No one can read the specifications and examine the drawings without perceiving that this was the gist of the Vandenburgh invention. Reference is made to the use of the plan for column construction, but the only use of it for that purpose is shown in Figure 6, which discloses two upright reinforcing bars with their spirals meshing, but connected in no other way.
The truss formation was not especially adapted to the needs and strains of the concrete column. The history of that field in the art shows that one of the pioneers was a Frenchman named Considere, who some years before the plaintiff's patent had shown that the tendency of concrete in a column was to expand outwardly under the vertical pressure to which it was chiefly exposed and the best way of reinforcing columns was by pouring the liquid concrete into a hooping made of a series of independent hoops, or into a continuous helicoidal spiral or cylindrical helix of a steel wire or rod, of a stovepipe form. After him, column hooping became common in the art as the only practical method of column reinforcing and the convolutions of the spiral were spaced and supported by steel uprights with which they engaged in various ways. In one French patent the convolutions were tied with steel wire to the spacers. It is the form of this engagement between the uprights and the spirals which is the crux of the present suit.