HMS Eskimo was a destroyer, Eskimo served throughout the Second World War, seeing action in Norway, the Mediterranean, the English Channel and in Burma. After the war Eskimo was used as an accommodation and headquarters ship, finally being used as a practice target before being scrapped in 1949.
Description
The Tribals were intended to counter the large destroyers being built abroad and to improve the firepower of the existing destroyer flotillas and were thus significantly larger and more heavily armed than the preceding . The ships displaced at standard load and at deep load. They had an overall length of , a beam of and a draught of . The destroyers were powered by two Parsons geared steam turbines, each driving one propeller shaft using steam provided by three Admiralty three-drum boilers. The turbines developed a total of and gave a maximum speed of . During her sea trials Eskimo made from at a displacement of . The ships carried enough fuel oil to give them a range of at . The ships' complement consisted of 190 officers and ratings, although the flotilla leaders carried an extra 20 officers and men consisting of the Captain (D) and his staff.
The primary armament of the Tribal-class destroyers was eight quick-firing (QF) 4.7-inch (120 mm) Mark XII guns in four superfiring twin-gun mounts, one pair each fore and aft of the superstructure, designated 'A', 'B', 'X', and 'Y' from front to rear. The mounts had a maximum elevation of 40°. For anti-aircraft (AA) defence, they carried a single quadruple mount for the QF two-pounder Mk II "pom-pom" gun and two quadruple mounts for the 0.5-inch (12.7 mm) Mark III machine gun. Low-angle fire for the main guns was controlled by the director-control tower (DCT) on the bridge roof that fed data acquired by it and the rangefinder on the Mk II Rangefinder/Director directly aft of the DCT to an analogue mechanical computer, the Mk I Admiralty Fire Control Clock. Anti-aircraft fire for the main guns was controlled by the Rangefinder/Director which sent data to the mechanical Fuze Keeping Clock.
The ships were fitted with a single above-water quadruple mount for torpedoes. The Tribals were not intended as anti-submarine ships, but they were provided with ASDIC, one depth charge rack and two throwers for self-defence, although the throwers were not mounted in all ships; Twenty depth charges was the peacetime allotment, but this increased to 30 during wartime.
Wartime modifications
Heavy losses to German air attack during the Norwegian Campaign demonstrated the ineffectiveness of the Tribals' anti-aircraft suite and the RN decided in May 1940 to replace 'X' mount with two QF Mark XVI dual-purpose guns in a twin-gun mount. To better control the guns, the existing rangefinder/director was modified to accept a Type 285 gunnery radar as they became available. The number of depth charges was increased to 46 early in the war, and still more were added later. To increase the firing arcs of the AA guns, the rear funnel was shortened and the mainmast was reduced to a short pole mast.
Construction and career
Authorized as one of nine Tribal-class destroyers under the 1936 Naval Estimates, Eskimo was the second ship of her name to serve in the Royal Navy. The ship was ordered on 19 June 1936 from Vickers-Armstrong and was laid down on 5 August at the company's High Walker, Newcastle upon Tyne, shipyard. Launched on 3 September 1937, Eskimo was commissioned on 30 December 1938 at a cost of £342,108 which excluded weapons and communications outfits furnished by the Admiralty.
Eskimo participated in the Second Battle of Narvik in April 1940. On 12 April, Eskimo was hit by a torpedo fired from German destroyer . The explosion caused severe damage, blowing off Eskimo'''s bow. After temporary repairs by the shipwrights of the fleet repair ship Vindictive at Skjelfjorden in Norway, Eskimo was able to return to the Vickers-Armstrong works at Newcastle for rebuilding, which took until Sept. 1940.