‘The mould is made in two parts, and each is separately filled by laying in a cake of clay which has been beaten out to the proper thickness on a wet plaster-block; it is pressed into the mould by repeated blows from a ball of wet sponge, then squeezed into all the angular parts and smoothed with sponge, wet leather, and horn. When both sides of the moulds are thus lined with clay, they are joined together, and the man lays a roll of clay along the inside of the joining, which he works down until the whole is smooth and solid.’ The mould is then carried into a stoveroom, and the plaster here absorbs the moisture so as to release the clay. The contents are carefully taken out, and the empty mould returned to the stove previous to being filled again. The seam that remains on the outside of vessels after fitting the two parts together[11] is removed by scraping and burnishing with wet horn; the handles and other appendages are then attached.

This is the process that is called ‘hollow-ware pressing’ or ‘squeezing.’ In ‘flat-ware pressing’ the mould is used to give the shape to the inside of the vessel only. The mould is placed on the extremity of the ‘whirler,’ a vertical revolving spindle provided with a circular table, similar to that of the thrower’s wheel. The plate-maker takes a cake of clay, which he has previously flattened out with his ‘batter,’ places it on the mould, and presses down with his hand. The upper surface of the cake of clay (what will ultimately be the bottom of the plate) is now shaped by an earthenware ‘profile.’ The mould is now taken off the whirler and at once replaced by another. Flat-ware, especially when greater finish is required, is also made in a double mould, and the clay may then be first thrown on the wheel so as to approximate to the shape required before being placed in the mould.

Porcelain — Part 31

Processes very similar to the hollow and flat-ware pressing are largely used by the Chinese. Dr. Bushell has unearthed a passage from a technical work, written in the time of the Chou dynasty, more than two thousand years ago, in which a distinction is made between the ordinary potters who worked with the wheel, and the moulders who made oblong bowls and sacrificial dishes. In a somewhat later work (19-90 A.D.) the writer notes both the advantage resulting from regularity of size, and the obstacles arising from the shrinkage of the parts in firing, when vessels are made in moulds.[12]

Porcelain — Part 31