H Width equal to, or a little less than, height (fig. 158), but if made too narrow it would look heavy, being _double-stemmed_.

A, N, & V are _double-stemmed_, and have internal angles, moreover, which would become too sharp--and tend to close [p272] up--if they were made too narrow (fig. 158).

Writing & Illuminating, & Lettering — Part 107

T The cross-bar--the _characteristic part_ of T--projects a fair way on either side of the stem.

Writing & Illuminating, & Lettering — Part 107

Z Either _wide_ or (moderately) _narrow_ (fig. 158).

Writing & Illuminating, & Lettering — Part 107

_The Narrow Letters, B, E, F, R, S, Y (X)_ (see fig. 159).

There is a point of division in these letters about the middle of the stem or a little above (see p. 273), and we may argue that each being composed, as it were, of two little letters--which are _half-height_, they are proportionately _half-width_: and this will be found approximately correct. B may be said to consist of one little D on the top of another, averaging respectively _half_ the height and width of a full-sized D.

E, F, & R follow the proportions of B (see also E, 4, p. 282). [p273]

S may be made of one little _tilted_ O on the top of another--joined together and having the superfluous parts removed.

These forms are related to the B, E forms, but it is permissible to make them a little wider to give clearance to the angles of the K and force to the single _arm_ and _loop_--the characteristic parts (see fig. 149)--of L and P.

In the letters B, E, H, K, X (A), F, R, P (S), Y there is generally a tendency to enlarge the lower part, the cross-bar--or division--being set above mid-height. This tendency may reasonably be accounted for as follows:--

The natural division of B, E, H, K, & X, regarded as abstract forms, would be symmetrical--_i.e._ at the centre of the stem.[66] In order that its _apparent position_ may be central, however, it is necessary, for optical reasons, to make [p274] its actual position above the centre.[67] And further, by a reasonable enlargement of the lower part, these letters acquire a greater appearance of stability.

It would be well, I think, for the letter-craftsman to begin by making such divisions at the _apparent centre_ (_i.e._ very slightly above mid-height; see E, F, X, Plate II.), so keeping most nearly to the _essential forms_ (see p. 275). Later he might consider the question of stability (see B, Plate II.). The exaggerated raising (or lowering) of the division associated with "Art Lettering" is illegible and ridiculous.