The development of engineering theory, coupled with the rising needs of industry, particularly with the advent of the Industrial Revolution, brought about accelerated development of screw-cutting lathes through the combination of screw-cutting machines with simple lathes as seen in figure 9 and in detail in figure 11. One important advance shown here is driving the machine by means of a cord or band so that any means of rotary power could be applied, not just hand or foot power. Of greater interest and technical importance to this study is the provision, seen to better advantage in figure 11, for readily changing from one master lead screw to another. This had already been achieved in the Manuel Wetschgi machine, as far as versatility is concerned, although not in quite such a convenient way.

[Illustration: Figure 7.--THREAD OF MODERN FORM recently cut, using the old screw and nut but with a new tool. The material threaded is carbon-steel drill rod. (Smithsonian photo 49276A.)]

Smithsonian Institution - United States National Museum - Bulletin 240 — Part 108

Figure 12, the headstock of another and more advanced lathe than shown in figures 9 and 11 but of the same type, shows "keys" (D), each of which is a partial nut of different pitch to engage with a thread of mating pitch. The dotted lines in figure 13 show the engaged and disengaged positions of one of these keys, and figure 14 shows the spindle with the various leads, C. At D is a grooved collar to be engaged by the narrow key shown in operating position at the left in figure 12 for the purpose of controlling the endwise movement of the spindle when used for ordinary turning instead of thread-cutting. In return for greater convenience and freedom from the expense of the many separate spindles, as typified by the Wetschgi machine, a sacrifice has been made in the length of the thread which can be cut without interruption.

Smithsonian Institution - United States National Museum - Bulletin 240 — Part 108

[Illustration: Figure 8.--BINDING SCREW seen at A in figure 3, showing the long smooth fadeout of the thread below the shoulder. (Smithsonian photo 49276.)]

Smithsonian Institution - United States National Museum - Bulletin 240 — Part 108

[Illustration: Figure 9.--MAKING SCREWS IN FRANCE in the third quarter of the 18th century. From _L'Encyclopédie, ou dictionnaire raisonné des sciences, des arts et des métiers ... receuil de planches sur les sciences, les arts libéraux, et les arts méchaniques, avec leur explication_ (Paris: 1762-1772), vol. 9, plate 1.]