SCUPPERS.--To have 2 oval Lead Scuppers, each side, 3 by 1-3/4 inch in the clear.
EYE PLATES.--To have two stout Iron Eye Plates, both sides forward for Bowsprit, Shrouds, &c. with two Bolts in each, and three Plates both sides for Runners and Tackles aft, the Eyes to reach up to the top of Roughtree Rail, and to have a good strong Iron Hanging Knee each side to the Beams abreast the Runners.
HATCHWAYS.--The Main Hatchway to be 4 feet broad and 3 feet fore and aft in the clear. The Combins 3 inches thick and 11 inches broad, let down on Carlings 3 inches thick and 4-1/2 inches broad.
SKYLIGHTS.--To be fitted with two Skylights with Plate Glass and Copper Guard, Commanders to be 3 feet long and 2 feet broad; Mates Skylight 2 feet square, with Plate Glass, Copper Bars 3/8 diameter.
ILLUMINATORS.--To have 10 oblong 4 inch Illuminators let into the Deck where most required, and a 5 inch Patent one over the Water Closet.
WINCH.--To have a Patent Winch round the Mast, and the Mast to be wedged in the partners.
PUMPS.--To be fitted with two Metal Bilge Pumps 3-1/2 inch chamber and everything complete; also one Metal Pump amidships with 6 inch chamber, and two sets of Brass Boxes, and everything requisite; also a Wash Deck Pump fitted aft.
RUDDER.--To have a good and sufficient Rudder with two sets of Metal Pintles and Braces, and one Iron Pintle and Brace at the head of the Sternpost above the Deck, and to be fitted with two good Tillers.
COMPANION.--To be fitted with a Companion and Bittacle complete.
HAWSEPIPES.--To have two stout cast Iron Hawsepipes for Chain Cable 4 inches in the clear, also two Cast Iron Pipes in the Deck with Bell Mouth, to conduct the Chain Cable below.
LOWER DECK.--The Lower Deck Beams to be regularly spaced and not more than 4 feet apart, the Deck to be 1-1/4 inches thick, of good Red Pine, the Midships part 3 feet broad, to be fastened to the Beams, also some of the side plank, the remainder made into Hatches, the edges bolted together with 1/2 inch Iron, the Deck and Cabin Floor abaft, Main Hatch to be 1 inch thick, and made into Hatches where required.
MAGAZINE.--To have a Magazine abaft, properly fitted and lined on the inside with 5 lb. Lead, and Double Doors with Copper Hinges and Lock to the outside Door.