Plain knitting is employed wherever a perfectly smooth, even surface is required. It looks quite differently on the wrong side from what it does on the right where it presents the appearance of vertical rows of plaiting.
BACK, OR SEAM-STITCH (fig. 350).—You may intentionally knit the wrong side of plain knitting. This is called purling and is done, in the following way: lay the thread over the left needle, and put the right one, downwards from above, behind the thread, into the loop on the left needle, lay the thread upwards from below, over the right needle, draw it through the loop, and drop the loop off the left needle. This stitch is used in knitting patterns, and for marking horizontal lines in smooth surfaces, such as the seam of a stocking, for instance.
[Illustration: FIG. 350. BACK OR SEAM-STITCH.]
PLAIN STITCH TAKEN FROM BEHIND (fig. 351).—Put the needle in from right to left, under the back part of the stitch; leave the thread behind the needle, then pass it from right to left over the needle and draw it through the stitch.
[Illustration: FIG. 351. PLAIN STITCH TAKEN FROM BEHIND.]
BACK, OR SEAM-STITCH TAKEN FROM BEHIND (fig. 352).—Put the needle into the second part of the stitch, upwards from below, and knit it as a back or seam-stitch.
[Illustration: FIG. 352. BACK OR SEAM-STITCH TAKEN FROM BEHIND.]
In plain stitch, taken from behind, the two threads of the loop are crossed, instead of lying side by side, as they do in plain knitting.
Back-stitch taken from behind, is only used for certain open-work patterns.
OVERS (fig. 353).—These form holes in plain knitting, and are used for open-work patterns and for increasing.
To make an over, lay the thread over the needle, and in the next row, knit this loop like any other stitch.
Each over adds one to the existing number of stitches. In cases, therefore, where the number is to remain the same, you have to make as many intakes as overs. Overs can only be used in conjunction with other stitches.
KNOT STITCH (fig. 354).—This forms a raised spot in plain knitting and is executed as follows: knit 1, and leave it on the left-hand needle; put the stitch you have made with the right needle back on the left, and knit it off. Make 4 or 5 similar stitches, all issuing from the same stitch on the left needle, so that you have 4 or 5 loops on the right needle; then drop the stitch off the left needle, and pull the 4 first loops over the last one.